Read Sharp PAS (serv.man3) Service Manual online
Page 10
PageCounter Administrator Guide
• Equitrac Professional Enterprise Edition version 4.6 or higher. See the Equitrac
Professional Enterprise Edition User Guide for details.
• System 4 version 4.0 or higher. See the System 4 User Guide for details.
Hardware Connections
Follow the instructions below to ensure a successful PageCounter installation.
1. Power Connection
Power supply connector
2. Serial Port
Standard serial com port
3. Copy Control
Copy control port
4. Ethernet Connection
RJ 45 Jack for Ethernet connection
5. Ethernet Expansion
RJ 45 Jack allows terminal to be used as a hub
6. Line Port
RJ 11 Jack for fax device connection (fax terminal only)
7. Fax Port
RJ 11 Jack for telephone connection (fax terminal only)
8. Magstripe reader
Optional data entry device
Connect Terminal to Network
Plug an Ethernet cable into one PageCounter Ethernet port, and then connect the
other end to either an Ethernet hub, or to an Ethernet wall jack, if appropriate. You
may connect another device (for example: network printer) to the second Ethernet
port.
other end to either an Ethernet hub, or to an Ethernet wall jack, if appropriate. You
may connect another device (for example: network printer) to the second Ethernet
port.
If the terminal is used as a hub for another device and the terminal loses
power or is disconnected, the device connected to the Expansion port
will lose network connectivity
power or is disconnected, the device connected to the Expansion port
will lose network connectivity
Click on the first or last page to see other PAS (serv.man3) service manuals if exist.