Read Sharp MX-M623U / MX-M753U (serv.man10) Service Manual online
MX-M753N SIMULATION 6 – 26
26-74
Purpose
Setting
Function (Purpose) Used to set the OSA trial mode.
Section
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
26-78
Purpose
Setting
Function (Purpose) Used to set the password of the remote
operation panel mode.
Section
Operation/Procedure
1)
1)
Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
2)
Press [SET] key.
27
27-1
Purpose
Setting
Function (Purpose) Used to set non-detection of communica-
tion error (U7-00) with RIC. (FSS function)
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
27-2
Purpose
Setting
Function (Purpose) Used to set the sender's registration num-
ber and the HOST server telephone num-
ber. (FSS function)
ber. (FSS function)
Section
Operation/Procedure
1)
1)
Select an item to be set with touch panel.
[USER FAX NO] [SERVA TEL NO]
[USER FAX NO] [SERVA TEL NO]
2)
Enter the set value with 10-key.
3)
Press [SET] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
27-4
Purpose
Setting
Function (Purpose) Used to set the initial call and toner order
auto send. (FSS function)
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
Item/Display
Content
Setting
range
Default
value
A
OSA TRIAL
MODE
(0: YES 1: NO)
MODE
(0: YES 1: NO)
0
Used to set the OSA
trial mode.
trial mode.
0 - 1
1
1
OSA trial mode is
canceled.
canceled.
0
Not detection
1
Detection
USER FAX_NO.
Sender registration number (Max. 16 digits)
SERVA TEL_NO.
Host server telephone number (Max. 16 digits)
• If the connection process is not completed
• If the connection process is not completed
normally when registering the FSS, calling to the
HOST may be continuously made every time when
the power is turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
HOST may be continuously made every time when
the power is turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
Item/Display
Content
Setting range
Default value
Remarks
A
FSS MODE
NEB1
Set the FSS MODE
Exclusive for send
in NE-B mode
in NE-B mode
0 - 3
0
1
NEB2
Send/Receive in
NE-B mode
NE-B mode
1
NFB1
Exclusive for send
in NE-F mode
in NE-F mode
2
NFB2
Send/Receive in
NE-F mode
NE-F mode
3
B
RETRY_BUSY
Resend number setting when busy
0 - 15
2
* 0: No retry
C
TIMER (MINUTE) _BUSY
Resend timer setting (minute) when busy
1 - 15
3
D
RETRY_ERROR
Resend number setting when error
0 - 15
1
* 0: No retry
E
TIMER (MINUTE) _ERROR
Resend timer setting (minute) when error
1 - 15
1
Click on the first or last page to see other MX-M623U / MX-M753U (serv.man10) service manuals if exist.