Read Sharp MX-M623U / MX-M753U (serv.man10) Service Manual online
MX-M753N SIMULATION 6 – 25
*1: 1-5sheets (20 sets) / 6-10 sheets (15 sets) /
11-15 sheets (10 sets)
26-69
Purpose
Setting
Function (Purpose) Used to set the operating conditions for
toner near end.
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2 is saved.
The set value in step 2 is saved.
<List of Default values and set values for each destination>
(Contents of set items)
A: Enable/Disable setting of the toner preparation message display
when the toner remaining quantity reaches 25%.
B: Enable/Disable setting of the toner preparation message display
when the toner near end status is reached.
C: Enable/Disable setting of the machine operation when the toner
end status is reached.
For except Japan, performs operation of set value "3" regardless of
the setting value.
D: Setting of the toner supply enable time (sec) to the developer
unit after toner near end. (Range of 180 - 380 sec)
When the set time is exceeded, it is judged as toner end.
The number of output print allowed in item D is based on the
assumption that the sheets are of A4 size with print ratio of 6%.
(The number of outputs allowed differs depending on the paper
size and the print ratio.)
A: Enable/Disable setting of the toner preparation message display
when the toner remaining quantity reaches 25%.
B: Enable/Disable setting of the toner preparation message display
when the toner near end status is reached.
C: Enable/Disable setting of the machine operation when the toner
end status is reached.
For except Japan, performs operation of set value "3" regardless of
the setting value.
D: Setting of the toner supply enable time (sec) to the developer
unit after toner near end. (Range of 180 - 380 sec)
When the set time is exceeded, it is judged as toner end.
The number of output print allowed in item D is based on the
assumption that the sheets are of A4 size with print ratio of 6%.
(The number of outputs allowed differs depending on the paper
size and the print ratio.)
Set value of item D and toner supply enable time
1: 180 sec, equivalent to 2.0K sheets
2: 230 sec, equivalent to 2.5K sheets
3: 280 sec, equivalent to 3.0K sheets
4: 330 sec, equivalent to 3.5K sheets
5: 380 sec, equivalent to 4.0K sheets
* Reference value based on 6% documents
1: 180 sec, equivalent to 2.0K sheets
2: 230 sec, equivalent to 2.5K sheets
3: 280 sec, equivalent to 3.0K sheets
4: 330 sec, equivalent to 3.5K sheets
5: 380 sec, equivalent to 4.0K sheets
* Reference value based on 6% documents
26-73
Purpose
Setting
Function (Purpose) Used to adjust the image loss (shade
removal amount) in the poster, the continu-
ous enlargement copy, the card scan, and
the A3 wide copy mode.
ous enlargement copy, the card scan, and
the A3 wide copy mode.
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
Item
Content
100 sheets
binding
finisher
finisher
4K finisher
4K saddle
finisher
Se
t v
al
u
e
D
e
fau
lt
val
ue
Se
t v
al
u
e
D
e
fau
lt
val
ue
Se
t v
al
u
e
D
e
fau
lt
val
ue
LIMIT
SHEETS
Staple limit
sheets
sheets
30
100
30
50
30
50
100
50
50
LIMIT
COPIES
Staple limit
copies ON
copies ON
ON
ON
ON
ON
ON
ON
Staple limit
copies OFF
copies OFF
OFF
OFF
OFF
LIMIT
SHEETS (L)
Staple limit
sheets
sheets
30
50
25
30
25
30
50
30
30
SADDLE
COPIES
Saddle staple
load quantity
limited
load quantity
limited
—
—
ON
ON
Saddle staple
load quantity
not limited
load quantity
not limited
OFF
Item/Display
Content
Setting
range
Default
value
A
TONER
PREPARATION
(0: YES 1: NO)
PREPARATION
(0: YES 1: NO)
0
The toner preparation
message is displayed.
message is displayed.
0 - 1
1
The toner preparation
message is not
displayed.
message is not
displayed.
B
TONER NEAR
END
(0: YES 1: NO)
END
(0: YES 1: NO)
0
The toner near end
message is displayed.
message is displayed.
0 - 1
0
1
The toner near end
message is not
displayed.
message is not
displayed.
C
TONER END
1
Operation Enable in
TONER END
TONER END
1 - 3
2
2
Operation STOP in
TONER END
TONER END
3
Operation STOP in
TONER END
TONER END
D
TONER END
COUNT
COUNT
Setting of Enable/Disable of
toner supply to the
developer unit after toner
near end
toner supply to the
developer unit after toner
near end
1 - 5
3
E
TONER E-MAIL
ALART
ALART
0
Condition for Low
status send of E-mail
alert
status send of E-mail
alert
0 - 1
1
When the toner
preparation message
is displayed (in near
near toner end)
preparation message
is displayed (in near
near toner end)
1
Condition for Low
status send of E-mail
alert
When near toner end
status send of E-mail
alert
When near toner end
Destination
Set value
Toner preparation
message
Toner near end message
U.S.A
0 (Displayed)
0 (Displayed)
CANADA
0 (Displayed)
0 (Displayed)
INCH
0 (Displayed)
0 (Displayed)
JAPAN
1 (Not Displayed)
0 (Displayed)
AB_B
0 (Displayed)
0 (Displayed)
EUROPE
0 (Displayed)
0 (Displayed)
U.K.
0 (Displayed)
0 (Displayed)
AUS.
0 (Displayed)
0 (Displayed)
AB_A
0 (Displayed)
0 (Displayed)
CHINA
0 (Displayed)
0 (Displayed)
Item/Display
Content
Setting
range
Default value
A
DELETING
SHADOW ADJ
(M)
SHADOW ADJ
(M)
Rear frame side
image loss quantity
(shade delete
quantity) adjustment
image loss quantity
(shade delete
quantity) adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
B
DELETING
SHADOW ADJ
(S)
SHADOW ADJ
(S)
Lead edge image
loss quantity (shade
delete quantity)
adjustment
loss quantity (shade
delete quantity)
adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
Click on the first or last page to see other MX-M623U / MX-M753U (serv.man10) service manuals if exist.