Read Sharp MX-M623U / MX-M753U (serv.man10) Service Manual online
MX-M753N SIMULATION 6 – 29
27-14
Purpose
Setting
Function (Purpose) Used to set the FSS function connection
test mode.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
* For setting the FSS function connection test mode, only DIS-
ABLE to ENABLE can be made. (ENABLE to DISABLE cannot
be made.)
be made.)
30
30-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and the detectors in other than the
paper feed section and the control circuits.
paper feed section and the control circuits.
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
30-2
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the sen-
sors and the detectors in the paper feed
section and the control circuits.
section and the control circuits.
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
33
33-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the card
reader sensor and the control circuit.
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
The operating conditions of the sensors and detectors are dis-
played.
The sensors and the detectors which are turned ON are high-
lighted.
33-2
Purpose
Data clear
Function (Purpose) Used to delete the ID (IDM) information of
card.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The ID (IDM) information of Felica card in the HDD is deleted.
The ID (IDM) information of Felica card in the HDD is deleted.
0
Disable (Default)
1
Enable
PPD
Resist detection
PFD2
Paper feed transport detection
POD1
Fusing rear detection
POD2
Main unit paper exit detection
POD3
Main unit paper exit full detection
LPPD
LCC paper pass detection
WEBEND1
Web end detection 1
WEBEND2
Web end detection 2
DSW_L
Left door open/close detection
DSW_F
Front door open/close detection
DSW_DSK
Desk left door open/close detection
TNFS
Waste toner full detection
TLS
Waste toner lock detection
THPS
Transfer belt home position detection
TANSET
Tray 1, 2 insertion detection
T1PPD
Tray 1 paper pass detection
T1LUD
Tray 1 paper upper limit detection
T1PED
Tray 1 paper empty detection
T1SPD
Tray 1 paper remaining quantity detection
MPRD1
Manual paper feed interface paper detection 1
MPRD2
Manual paper feed interface paper detection 2
T2LUD
Tray 2 paper upper limit detection
T2PED
Tray 2 paper empty detection
T2SPD
Tray 2 paper remaining quantity detection
M1SS1
Tray 3 rear edge detection 1
M1SS2
Tray 3 rear edge detection 2
M1SS3
Tray 3 rear edge detection 3
M1SS4
Tray 3 rear edge detection 4
M2SS1
Tray 4 rear edge detection 1
M2SS2
Tray 4 rear edge detection 2
M2SS3
Tray 4 rear edge detection 3
M2SS4
Tray 4 rear edge detection 4
M1PFD
Tray 3 paper pass detection
M1LUD
Tray 3 paper upper limit detection
M1PED
Tray 3 paper empty detection
M1SPD
Tray 3 paper remaining quantity detection
M2PFD
Tray 4 paper pass detection
M2LUD
Tray 4 paper upper limit detection
M2PED
Tray 4 paper empty detection
M2SPD
Tray 4 paper remaining quantity detection
MPFD1
Paper pass detection 1 from manual paper feed tray
MPFD2
Paper pass detection 2 from manual paper feed tray
MPED
Manual paper feed paper empty detection
MPLD1
Manual paper feed length detection 1
MPLD2
Manual paper feed length detection 2
MTOP1
Manual paper feed pulling detection 1
MTOP2
Manual paper feed pulling detection 2
DSW_R
Manual paper feed open/close detection
CARD
Card Yes/No detection
DATA
Card number signal detection
CLOCK
Reference clock signal detection
Click on the first or last page to see other MX-M623U / MX-M753U (serv.man10) service manuals if exist.