Read Sharp MX-M623U / MX-M753U (serv.man10) Service Manual online
MX-M753N SIMULATION 6 – 22
26-3
Purpose
Setting
Function (Purpose) Used to set the specifications of the auditor.
(Japan only)
Section
Auditor
Operation/Procedure
Select an item to be set with the touch panel.
Select an item to be set with the touch panel.
(*1) Displayed only when EQUITRAC.
(*2) Details of the vendor mode
Operation 1:
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
26-5
Purpose
Setting
Function (Purpose) Used to set the count mode in A3 (11" x
17") print.
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the setting value with 10-key
1 = Count up by 1, 2 = Count up by 2
1 = Count up by 1, 2 = Count up by 2
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
26-6
Purpose
Setting
Function (Purpose) Used to set the specifications of the desti-
nation.
Section
Operation/Procedure
1)
1)
Select an item to be set with the touch panel.
2)
Press [EXECUTE] key.
The selected set content is saved.
The selected set content is saved.
Item/Display
Content
Default
value
BUILT-IN
AUDITOR
AUDITOR
P10
Built-in auditor mode
(standard mode) operation.
(standard mode) operation.
P10
EC1
EC1 mode operation
OUTSIDE
AUDITOR
AUDITOR
NONE
No external connection
vendor is used.
vendor is used.
NONE
P VENDOR1
Coin vendor mode
(Only the copy mode can be
controlled.)
(Only the copy mode can be
controlled.)
P VENDOR2
Vendor mode communicating
with the parallel I/F (for
DocuLyzer) (Japan only)
with the parallel I/F (for
DocuLyzer) (Japan only)
VENDOR-EX
(*1)
(*1)
Vendor I/F for EQUITRAC
VENDOR-EX
(MULTI) (*1)
(MULTI) (*1)
VENDOR-EX + Multi job
cueing Enable mode
cueing Enable mode
P OTHER
NOT USED
S_VENDOR
Serial vendor mode
DOC ADJ
ON
Support for the auditor in
document filing print
document filing print
OFF
OFF
No support for the auditor in
document filing print
document filing print
PF ADJ
ON
Continuous printing is
performed in the duplex print
mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
performed in the duplex print
mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
OFF
OFF
Continuous printing is not
performed in the duplex print
mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back surface.
performed in the duplex print
mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back surface.
VENDOR
MODE (*2)
MODE (*2)
MODE1
Vendor mode 1
MODE
3
MODE2
Vendor mode 2
MODE3
Vendor mode 3
COUNTUP
TIMING
TIMING
FUSER_IN
When the paper lead edge
passes the fusing rear
sensor.
passes the fusing rear
sensor.
EXIT_
OUT
FUSER_OUT
When the paper rear edge
passes the fusing rear
sensor.
passes the fusing rear
sensor.
EXIT_OUT
When the paper rear edge
passes the paper exit sensor
in the main unit, the right tray,
and the after process unit.
passes the paper exit sensor
in the main unit, the right tray,
and the after process unit.
IMS
CONTROL
CONTROL
ON
There is some restriction in
the image send mode.
the image send mode.
OFF
OFF
There is no restriction in the
image send mode.
image send mode.
PRINTER
CONTROL
CONTROL
MODE1
PRINTER CONTROL
MODE1 (All the items of
OUTSIDE AUDITOR can be
selected.)
MODE1 (All the items of
OUTSIDE AUDITOR can be
selected.)
MODE
1
MODE2
PRINTER CONTROL
MODE2 (The item of
OUTSIDE AUDITOR must
be the value of "P VENDOR
1" and the other buttons are
gray out.)
MODE2 (The item of
OUTSIDE AUDITOR must
be the value of "P VENDOR
1" and the other buttons are
gray out.)
MODE3
PRINTER CONTROL
MODE3 (The item of
OUTSIDE AUDITOR must
be the value of "P OTHER"
and the other buttons are
gray out.)
MODE3 (The item of
OUTSIDE AUDITOR must
be the value of "P OTHER"
and the other buttons are
gray out.)
VENDER
MODE
Completion of
the specified
quantity.
(Money
remaining)
Insufficient
money during
copy job
Completion of
the specified
quantity.
(No money
remaining)
remaining)
No money
remaining
remaining
Condition 1
Condition 2
Condition 3
MODE1
Operation 1
Operation 2
Operation 1
MODE2
Operation 1
Operation 1
Operation 1
MODE3
Operation 1
Operation 3
Operation 3
Item/Display
Content
Default value
A
TOTAL (B/W)
Total counter (B/W)
2
B
MAINTE (B/W)
Maintenance counter (B/W)
2
C
DEV (B/W)
Developer counter (B/W)
Item/Display
Content
Default
value
Click on the first or last page to see other MX-M623U / MX-M753U (serv.man10) service manuals if exist.