Read Sharp MX-M623U / MX-M753U (serv.man10) Service Manual online
MX-M753N SIMULATION 6 – 24
26-49
Purpose
Setting
Function (Purpose) Used to set the print speed of postcards
mode.
Section
Operation/Procedure
Select the copy speed mode with the touch panel. (Default: LOW)
When the setting is changed, the paper feed interval in print or
copy in the postcard mode is changed and the job speed is
changed accordingly.
LOW: The paper feed interval is long. (Normal mode)
HIGH: The paper feed interval is short. (when a paper jam occurs,
the number of sheets of jam paper is greater than that in the LOW
mode.)
Select the copy speed mode with the touch panel. (Default: LOW)
When the setting is changed, the paper feed interval in print or
copy in the postcard mode is changed and the job speed is
changed accordingly.
LOW: The paper feed interval is long. (Normal mode)
HIGH: The paper feed interval is short. (when a paper jam occurs,
the number of sheets of jam paper is greater than that in the LOW
mode.)
26-50
Purpose
Setting
Function (Purpose) Used to set the operation specifications
and functions.
Section
Operation/Procedure
1)
1)
Select a target item of setting with [
] [] key on the touch
panel.
2)
Enter the set value with 10-key.
3)
Press [OK] key. (The set value is saved.)
(*1) Default values for each destination of item A
26-52
Purpose
Setting
Function (Purpose) Used to set whether non-printed paper
(insertion paper, cover paper) is counted up
or not.
or not.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
26-53
Purpose
Setting
Function (Purpose) Used to set Inhibit/Allow of the user auto
calibration (gradation, density adjustment)
in the copy mode.
in the copy mode.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
26-54
Purpose
Setting
Function (Purpose) Used to set Inhibit/Allow of the user auto
calibration (gradation, density adjustment)
in the print mode.
in the print mode.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
26-65
Purpose
Setting
Function (Purpose) Used to set the limit of the staple process.
Section
Section
Operation/Procedure
Use the touch key to set.
[Target paper size]
<LIMIT SHEETS>
A4, B5, 8.5 x 11, 16K
<LIMIT SHEETS(L)>
(A3, B4, 11 x 17, 8.5 x 14, 8.5 x 13.5, 8.5 x 13.4, 8.5 x 13, 8K, A4R,
8.5 x 11R)
Use the touch key to set.
[Target paper size]
<LIMIT SHEETS>
A4, B5, 8.5 x 11, 16K
<LIMIT SHEETS(L)>
(A3, B4, 11 x 17, 8.5 x 14, 8.5 x 13.5, 8.5 x 13.4, 8.5 x 13, 8K, A4R,
8.5 x 11R)
Item/Display
Content
Default
value
A
BW REVERSE
0
BW reverse copy Disable
Refer
to *1
1
BW reverse copy Enable
B
FEED TRAY
COLOR
COLOR
0
Paper feed tray color display
ON during paper feed
ON during paper feed
0
1
Paper feed tray color display
OFF during paper feed
OFF during paper feed
Destination
Item A
U S A
1
CANADA
1
INCH
1
JAPAN
1
AB_B
1
EUROPE
1
U K
0
AUS
1
AB_A
1
CHINA
1
0
Count up
1
No count up
Destination
Default
U.S.A
0 (Counted)
CANADA
0 (Counted)
INCH
0 (Counted)
JAPAN
1 (Not counted)
AB_B
0 (Counted)
EUROPE
0 (Counted)
U.K.
0 (Counted)
AUS.
1 (Not counted)
AB_A
0 (Counted)
CHINA
0 (Counted)
0
Inhibit (Default)
1
Allow
0
Inhibit (Default)
1
Allow
Click on the first or last page to see other MX-M623U / MX-M753U (serv.man10) service manuals if exist.