Read Sharp MX-M364N / MX-565N (serv.man4) Service Manual online
MX-M565N SIMULATION 5 – 11
4
4-2
Purpose
Operation test/check
Function (Purpose)
Check the paper feed section (Desk/LCC)
sensors and detectors and their control cir-
cuits.
sensors and detectors and their control cir-
cuits.
Section
Paper feed, paper reverse/transport
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played. The code names of the sensors and the detectors which
are active are highlighted.
played. The code names of the sensors and the detectors which
are active are highlighted.
<Desk>
<Tandem LCC>
<A4 LCC>
4-3
Purpose
Operation test/check
Function (Purpose)
Used to check the paper feed section
(Desk/LCC) loads and their control circuits.
(Desk/LCC) loads and their control circuits.
Section
Paper feed, paper reverse/transport
Operation/Procedure
1)
Select the load item that is required to operation check with the
touch panel key.
touch panel key.
2)
Press [EXECUTE] key.
The selected load performs the operation. When [EXECUTE]
key is pressed, the operation is terminated.
key is pressed, the operation is terminated.
<Desk>
<Tandem LCC>
<A4 LCC>
4-5
Purpose
Operation test/check
Function (Purpose)
Check the operation of the paper transport
clutch for the paper feed tray unit.
clutch for the paper feed tray unit.
Section
Paper feed, paper reverse/transport
Operation/Procedure
[Check the ON operation]
Press the clutch button of the target of the ON operation check.
Checking is started. When the operation is normal, the button on
the display is highlighted. When it is abnormal, the button is not
highlighted.
Checking is started. When the operation is normal, the button on
the display is highlighted. When it is abnormal, the button is not
highlighted.
[Check the OFF operation]
Press the highlighted button which is ON. When the operation is
normal, the highlighted button on the display returns to the normal
display. When it is abnormal, the highlighted display is maintained.
normal, the highlighted button on the display returns to the normal
display. When it is abnormal, the highlighted display is maintained.
D
STAPLE REAR
Stapling position
adjustment (Rear, one
position)
adjustment (Rear, one
position)
94 - 106
100
E
STAPLE FRONT
Stapling position
adjustment (one
position in front)
adjustment (one
position in front)
94 - 106
100
F
PUNCH
CENTER
CENTER
Punch center
adjustment
adjustment
30 - 70
50
G
PUNCH HOLE
Punch hole position
adjustment
adjustment
46 - 52
50
D1MDC
Tray 1 installation detection connector
D1PED
Tray 1 paper empty detector
D1PPD
Tray 1 paper transport detector
D1PQD
Tray 1 remaining paper quantity detector
D1PRED1
Tray 1 paper rear edge detector 1
D1PRED2
Tray 1 paper rear edge detector 2
D1PRED3
Tray 1 paper rear edge detector 3
D1PRED4
Tray 1 paper rear edge detector 4
D1ULD
Tray 1 upper limit detector
D2MDC
Tray 2 installation detection connector
D2PED
Tray 2 paper empty detector
D2PPD
Tray 2 paper transport detector
D2PQD
Tray 2 remaining paper quantity detector
D2PRED1
Tray 2 paper rear edge detector 1
D2PRED2
Tray 2 paper rear edge detector 2
D2PRED3
Tray 2 paper rear edge detector 3
D2PRED4
Tray 2 paper rear edge detector 4
D2ULD
Tray 2 upper limit detector
DCDT
Tandem tray insertion detection
DPFD1
Tray 1 paper transport detector
D1LUD
Tray 1 paper empty detector
D1PED
Tray 1 paper empty detector
D1PQD
Tray 1 remaining paper quantity detector
D1PPD1
Tray 1 paper transport detector 1
D1PPD2
Tray 1 paper transport detector 2
D2LUD
Tray 2 upper limit detector
D2PED
Tray 2 paper empty detector
D2PQD
Tray 2 remaining paper quantity detector
LPFD
LCC transport sensor
LUD
LCC tray upper limit sensor
LDD
LCC tray lower limit sensor
LPED
LCC tray paper empty sensor
LCD
LCC tray insertion detection
LDSW
LCC upper open/close detection SW
LRE
LCC lift motor encoder sensor
L24VM
LCC24V power monitor
LLSW
LCC upper limit SW
LCCD
LCC main unit connection detection
Item
Display
Item
Set range
Default
value
D1LM
Tray 1 lift up motor
D1PFC
Tray 1 paper feed clutch
D2LM
Tray 2 lift up motor
D2PFC
Tray 2 paper feed clutch
DPFM
Desk transport motor
DPTRC
Desk paper transport clutch
D1LM
Tray 1 lift up motor
D1PFC
Tray 1 paper feed clutch
D2LM
Tray 2 lift up motor
D2PFC
Tray 2 paper feed clutch
D2PUS
Tray 2 paper feed solenoid
DPFM
Desk transport motor
DPTRC
Desk paper transport clutch
LPFM
LCC transport motor
LLM
LCC lift motor
LPFC
LCC paper feed clutch
LPFS
LCC paper feed solenoid
LTRC
LCC transport clutch
button
Content
DTRC
Desk transport clutch
LTRC
LCC transport clutch
Click on the first or last page to see other MX-M364N / MX-565N (serv.man4) service manuals if exist.