Read Sharp MX-FX10 Service Manual online
MX-FX10 SIMULATIONS, FAX SOFTWARE SWITCH 4-12
66
37
Speaker sound volume adjustment
Used to send the following test sounds to the line and the speaker to perform the adjustment of the sound
variation and the sound volume.The send level to the line is determined by the soft SW set value. The
selected sound variation and the sound volume are written into the corresponding soft SW.
Used to send the following test sounds to the line and the speaker to perform the adjustment of the sound
variation and the sound volume.The send level to the line is determined by the soft SW set value. The
selected sound variation and the sound volume are written into the corresponding soft SW.
Main
code
code
Sub
code
Contents
Remark
Sim66-37 SPEAKER
Sim66-37 SPEAKER
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
[OK] key
Sim66-37 SPEAKER
1:RINGER
2:LINE MONITOR
3:ON HOOK
( 1 - 6 )
2:LINE MONITOR
3:ON HOOK
( 1 - 6 )
X
ON HOOK SMA.
1:SMA.-1 3:LAR.-3
2:MED.-2 4:DF VOL.
( 1 - 4 )
1:SMA.-1 3:LAR.-3
2:MED.-2 4:DF VOL.
( 1 - 4 )
X
ON HOOK
SMALL -1
PRESS BACK TO STOP
SMALL -1
PRESS BACK TO STOP
EXEC
Sim66-37 SPEAKER
4:SCAN FINISH
5:TX/RX FINISH
6:DTMF
( 1 - 6 )
5:TX/RX FINISH
6:DTMF
( 1 - 6 )
X
Sim66-37 SPEAKER
ON HOOK
1:SMA.2:MED.3:LAR.
1:SMA.2:MED.3:LAR.
( 1 - 3 )
X
Select
"4: DEFAULT VOL."
"4: DEFAULT VOL."
A sound is delivered while EXEC is highlighted.
Ringing until [BACK]
key is pressed.
key is pressed.
After completion, the display
shifts to SIM66-37 window.
shifts to SIM66-37 window.
Sim66-37 SPEAKER
ON HOOK
SMALL -1
1 2 3 4 5 6 7
( 1 - 3 )
SMALL -1
1 2 3 4 5 6 7
( 1 - 3 )
X
Sim66-37 SPEAKER
ON HOOK
SMALL -1
PRESS BACK TO STOP
SMALL -1
PRESS BACK TO STOP
EXEC
Ringing while EXEC is displayed.
Ringing until RETURN key is pressed.
Ringing until RETURN key is pressed.
Mute setting available
Sim66-37 SPEAKER
Sim66-37 SPEAKER
Sim66-37 SPEAKER
1:RINGER
2:LINE MONITOR
3:ON HOOK
( 1 - 6 )
2:LINE MONITOR
3:ON HOOK
( 1 - 6 )
X
LINE MONITOR SMA.
1:SMA.-1 3:LAR.-3
2:MED.-2 4:DF VOL.
( 1 - 5 )
1:SMA.-1 3:LAR.-3
2:MED.-2 4:DF VOL.
( 1 - 5 )
X
LINE MONITOR
SMALL -1
PRESS BACK TO STOP
SMALL -1
PRESS BACK TO STOP
EXEC
Sim66-37 SPEAKER
4:SCAN FINISH
5:TX/RX FINISH
6:DTMF
( 1 - 6 )
5:TX/RX FINISH
6:DTMF
( 1 - 6 )
X
Sim66-37 SPEAKER
LINE MONITOR SMA.
5:NON
5:NON
( 1 - 5 )
X
Ringing while EXEC is displayed
Ringing while EXEC is displayed
After completion, the display shifts
to SIM66-37 initial window.
to SIM66-37 initial window.
Sim66-37 SPEAKER
LINE MONITOR
1:SMA.2:MED.3:LAR.
1:SMA.2:MED.3:LAR.
( 1 - 3 )
X
Sim66-37 SPEAKER
LINE MONITOR
SMALL -1
PRESS BACK TO STOP
SMALL -1
PRESS BACK TO STOP
EXEC
3sec later
3sec later
When "4: DEFAULT VOL" is selected
Sim66-37 SPEAKER
LINE MONITOR
SMALL -1
1 2 3 4 5 6 7
( 1 - 3 )
SMALL -1
1 2 3 4 5 6 7
( 1 - 3 )
X
"NO SOUND" cannot be set for DTMF, either.
After setting "DEFAULT VOL,"
ON HOOK
SMALL
SMALL
[BACK] key
ON HOOK
1: SMA. 2: MED. 3: LAR
1: SMA. 2: MED. 3: LAR
[BACK] key
Returns to
ON HOOK
1: SMA -2
2: MED.-4
3: LAR -7
4: DEFAULT VOL.
ON HOOK
1: SMA -2
2: MED.-4
3: LAR -7
4: DEFAULT VOL.
[BACK] key
[BACK] key
[BACK] key
[BACK] key
[BACK] key
[BACK] key
After selection with numeric keys
After selection
with numeric key
with numeric key
After selection with numeric key
After selection
with numeric key
with numeric key
After selection
with numeric key
with numeric key
After selection with numeric key
After selection with
numeric key
numeric key
After selection
with numeric key
with numeric key
[CA] key
: Simulation cancel
[INTERRUPT] key : Sub code input window
[C] key
[C] key
: Input clear
keys
: Page switch
Numeric key
: Item selection, sound volume selection
[OK] key
: Settlement and execution.
After completion, a sound rings for several
seconds and the display shift to the selection
window.
seconds and the display shift to the selection
window.
[START] key
: Input value settlement
[BACK] key
: Returns to the selection window.
Click on the first or last page to see other MX-FX10 service manuals if exist.