MX-FX10. Service Manual. - Sharp Copying Equipment Service Manual (repair manual). Page 20

MX-FX10 SIMULATIONS, FAX SOFTWARE SWITCH 4-10

66

24

FAST SRAN clear
Used to clear the FAST SRAM data.

30

TEL/LIU status change check
Used to display the change contents regardless of the soft SW setting when the status of the polarity 
inversion relay, the handset hook switch, or the external telephone hook switch is changed. The display of 
the changed status is remained until the interruption command is made by pressing RETURN key.

31

TEL/LIU setting
The following bit 0/1 is alternatively switched. At the same time, the target signal name is highlighted.

Main 
code

Sub 

code

Contents

Remark

Sim66-24 FAST CLR

Sim66-24 FAST CLR

[OK] key

Sim66-24 FAST CLR

INITIAL

EXEC

INITIALIZED

Sim66-24 FAST CLR

Not Supported

FAST Correspond

FAST NO Correspond

INITIAL

EXEC

[CA] key

: Simulation cancel

[INTERRUPT] key : Sub code input window
[OK] key

: Settlement

[START] key

: Settlement

[C] key

: Disable

[BACK] key

: Disable

After pressing 
[OK] key,
during 
execution

Completion of 
execution
(Highlighted during 
 execution)

1sec later

Simulation code input window

Sim66-30 TEL STAT.

Sim66-30 TEL STAT.

[OK] key

[BACK] key

SIM66-30 
initial window

EXEC

HS2 :XXX  HS1  :XXX
RHS :XXX  EXHS :XXX
PRESS BACK TO STOP

EXEC

XXX: ON or OFF

[CA] key

: Simulation cancel

[INTERRUPT] key : Sub code input window
[OK] key

: Settlement

[BACK] key

: Returns to the selection 

window

[START] key

: Settlement

[C] key

: Disable

After pressing 
[OK] key,
during 
execution

Sim66-31 TEL OUTPUT

Sim66-31 TEL OUTPUT

After selection
with numeric keys

[OK] key

[OK] key

[BACK] key

[BACK] key

[OK] key

Sim66-31 TEL OUTPUT

SIM72-3 initial window

SIM72-3 initial window

1:CION 2:150VON

3:EC

 4:S

(1 - 5)

X

1:CION
5:MSR

EXEC

1:CION
5:MSR
PRESS BACK TO STOP

EXEC

Sim66-31 TEL OUTPUT

5:MSR

(1 - 5)

X

Selection of two or more items can be made.
(The selected numbers are highlighted.)
Though numeric keys is pressed in the sequence
of "1 and 5" or "5 and 1," the display is made
in the sequence of the normal order
(1 and 5) when OK key is pressed.

Sim66-31 TEL OUTPUT

5:MSR

PRESS BACK TO STOP

EXEC

Sim66-31 TEL OUTPUT

5:MSR

EXEC

After pressing [OK] key,
during execution

After pressing [OK] key,
during execution

Switchable for 5 or more items

Switchable for 5 or more items

[CA] key

: Simulation cancel

[INTERRUPT] key : Sub code input window
Numeric keys

: Item selection

[OK] key

: Input value settlement and execution

[START] key

: Input value settlement and execution

[BACK] key

: Returns to the selection window

         keys

: Page switch

[C] key

: Input value clear. ON when highlighted.