Read Sharp MX-FX10 Service Manual online
MX-FX10 SIMULATIONS, FAX SOFTWARE SWITCH 4-14
5. FAX software switch
A. Software switch setup change quick reference
Large item
Medium item
Content of switch
System
settings
Soft SW No.
Purpose of use
Dial (Calling)
Remote
machine
calling disable
machine
calling disable
Polarity inversion monitor during call-out
-
SW 23-3
Dial disable
Pause time setting
Inital setup
SW 28-1~4
Dial disable/Erroneous dialing
Tone/pulse default setting
-
SW 22-5,6
Dial disable
DTMF signal send time
-
SW 26-1~5
Dial disable in PB(PB/FAX service,etc.)
DTMF send MAX. level
-
SW 65-1~4
Dial disable in PB(PB/FAX service,etc.)
DTMF send level (High area)
-
SW 64-4~8
Dial disable in PB(PB/FAX service,etc.)
DTMF send level(Difference between high
area and low area)
area and low area)
-
SW 65-5~8
Dial disable in PB(PB/FAX service,etc.)
Minimum pause time (DTMF) setting
-
SW 26-6~8
Dial disable in PB(PB/FAX service,etc.)
Scanner scanning completion speaker sound
volume
volume
-
SW 46-1,2
Scanning sound volume pattern number
-
SW 46-3~8
Minimum pause time (10PPS) setting
-
SW 19-1~4
Dial disable in pulse
Minimum pause time (20PPS) setting
-
SW 19-6~8
Dial disable in pulse
Signal
detection
detection
Dial tone detection
-
SW 21-1
Dial tone detection disable
Busy tone detection
-
SW 21-2
Busy tone detection disable
Redial
Error
Number of resends in a communication error Send setup
SW 14-1~4
Error
Resend interval in a communication error
-
SW 14-5~8
Error(SG3)
Resend in case of an error, Super G3 disable
in the last call out
in the last call out
-
SW 43-2
Busy
Number of recalls when busy
Send setup
SW 13-1~4
Busy
Resend interval when busy
-
SW 13-5~8
Reception
(Calling)
(Calling)
CI detection
disable
disable
CI detection
-
SW 86-2,3
Not used
-
SW 86-6~8
CI signal OFF detection enable time
-
SW 87-1~7
External
telephone
handset
telephone
handset
External
telephone
connection
telephone
connection
External telephone connection
Inital setup
SW 41-1
External telephone connection
Remote switch number setting
-
SW 7-1~8
Remote switch detection error
Communication
General
Signal send level
-
SW 15-4~8
When the remote machine does not
receive signals in a proper level
receive signals in a proper level
Polarity inversion monitor during
communication
communication
-
SW 23-2
SG3
V.34 mode function
-
SW 43-1
Frequent errors in SG3 communication
Symbol speed mask in V.34 receive
-
SW 43-4~6
Frequent errors in SG3 communication
Send
G3/SG3
Countermeasures against echo in send (The
hold time until signal send is set after DIS
receive.)
hold time until signal send is set after DIS
receive.)
-
SW69-8
An error occurs in phase B
G3
Error process in RTN receive
-
SW73-1
OK is displayed when RTN is received
Receive
G3/SG3
CSI send
-
SW70-2
Max. length of receive
-
SW69-4
Substitute receive
-
SW9-1
SG3
Countermeasures against echo in receive
(CED tone send interval)
(CED tone send interval)
-
SW69-7
An error occurs in phase B in reception
Modem speed fixed in receive
-
SW16-5,6
EYE-Q check
-
SW72-7
Receive print
Paper
selection
selection
Paper selection priority order
-
SW35-2
Output condition setting
Receive
setup
setup
SW35-3,4
Automatic reduction print
-
SW35-1
Automatic reduction magnification ratio
-
SW 35-5~8
Rotation print
-
SW40-1
To disable rotation print
Click on the first or last page to see other MX-FX10 service manuals if exist.