Read Sharp MX-FX10 (serv.man3) User Guide / Operation Manual online
102
SYSTEM SETTINGS
ACC. NAME PRINT
When using auditing mode, this setting determines
whether or not the recipient is notified of the sender's
account name when a fax is sent. This setting is
initially disabled (the recipient is not notified).
whether or not the recipient is notified of the sender's
account name when a fax is sent. This setting is
initially disabled (the recipient is not notified).
1
Follow steps 1 through 6 of "INITIAL
PROCEDURE" (page 94).
PROCEDURE" (page 94).
2
Select "SENDING FUNCTION" with the [
]
or [
] key and then press the [OK] key.
3
Select "ACC. NAME PRINT" with the [
] or
[
] key and then press the [OK] key.
• The setting is enabled and a checkmark appears in
the checkbox.
• This setting is only effective if auditing mode is
enabled.
• If this procedure is performed when the setting is
enabled, the checkmark will be cleared and the
setting disabled.
setting disabled.
RECALL SETTING (BUSY)
This setting is used to set the number of recall
attempts and the interval between recall attempts
when a transmission is not successful due to the line
being busy or other reason.
Normally the machine is set to make 2 recall attempts
at intervals of 3 minutes.
If you do not wish to have recalling take place, set the
number of attempts to "0" (steps 6 and 7).
attempts and the interval between recall attempts
when a transmission is not successful due to the line
being busy or other reason.
Normally the machine is set to make 2 recall attempts
at intervals of 3 minutes.
If you do not wish to have recalling take place, set the
number of attempts to "0" (steps 6 and 7).
1
Follow steps 1 through 6 of "INITIAL
PROCEDURE" (page 94).
PROCEDURE" (page 94).
2
Select "SENDING FUNCTION" with the [
]
or [
] key and then press the [OK] key.
3
Select "RECALL SETTING (BUSY)" with the
[
[
] or [
] key and then press the [OK] key.
If you do not wish to change the recall interval setting,
go to step 6.
go to step 6.
4
Select "RECALL INTERVAL" with the [
]
or [
] key and then press the [OK] key.
5
Enter the recall interval (01 to 15) with the
numeric keys and then press the [OK] key.
numeric keys and then press the [OK] key.
• The recall interval can be set from 1 to 15 minutes.
• After finishing step 5, if you do not wish to change the
• After finishing step 5, if you do not wish to change the
number of recall attempts, press the [BACK] key to exit.
6
Select "RECALL TIMES" with the [
] or
[
] key and then press the [OK] key.
7
Enter the number of recall attempts with the
numeric keys and then press the [OK] key.
numeric keys and then press the [OK] key.
• The number of recall attempts can be set in each
country are shown in the following table.
Country Differentiation Table
T
(Normal settings are indicated by an asterisk (*).)
• If you do not wish to have recalling take place, set the
number of attempts to "0".
RECALL SET (ERR)
When sending a fax, this setting is used to select
whether or not the machine will automatically
re-attempt the call if the transmission fails due to a line
error. Normally the machine is set to make 1 recall
attempt at intervals of 1 minute.
If you do not wish to have recalling take place, set the
number of attempts to "0" (steps 6 and 7).
whether or not the machine will automatically
re-attempt the call if the transmission fails due to a line
error. Normally the machine is set to make 1 recall
attempt at intervals of 1 minute.
If you do not wish to have recalling take place, set the
number of attempts to "0" (steps 6 and 7).
1
Follow steps 1 through 6 of "INITIAL
PROCEDURE" (page 94).
PROCEDURE" (page 94).
2
Select "SENDING FUNCTION" with the [
]
or [
] key and then press the [OK] key.
3
Select "RECALL SET(ERR)" with the [
]
or [
] key and then press the [OK] key.
If you do not wish to change the recall interval setting,
go to step 6.
go to step 6.
4
Select "RECALL INTERVAL" with the [
]
or [
] key and then press the [OK] key.
Number of
recall attempts
Interval between
attempts
United
Kingdom
Kingdom
0 to 10 (*2)
1 to 15 minutes
(*3 minutes)
(*3 minutes)
Australia and
New Zealand
New Zealand
0 to 9 (*2)
1 to 15 minutes
(*3 minutes)
(*3 minutes)
Hong Kong
0 to 3 (*2)
1 to 15 minutes
(*3 minutes)
(*3 minutes)
Singapore,
India, and
Thailand
India, and
Thailand
0 to 9 (*2)
1 to 15 minutes
(*3 minutes)
(*3 minutes)
Taiwan
0 to 15 (*2)
4 to 15 minutes
(*4 minutes)
(*4 minutes)
South Africa
0 to 10 (*2)
1 to 15 minutes
(*3 minutes)
(*3 minutes)
• If you made a mistake in step 5 or step 7,
move the cursor to the mistake with the [
]
or [
] key and enter the correct number.
• Even if this setting is enabled, the
machine will not re-attempt the call when
a fax is sent by manual transmission.
a fax is sent by manual transmission.
Note
Pegasus-E_Fax_Ex.book 102 ページ ２００９年６月５日 金曜日 午後１時４９分
Click on the first or last page to see other MX-FX10 (serv.man3) service manuals if exist.