Read Sharp MX-FX10 (serv.man3) User Guide / Operation Manual online
100
SYSTEM SETTINGS
In Taiwan, please change step 5 to the following step.
After completing the following step, continue from step 6.
After completing the following step, continue from step 6.
5
Enter the time in 12-hour format with the
numeric keys and press the [OK] key.
numeric keys and press the [OK] key.
Enter a number from 01 to 12 for the hour and a number
from 00 to 59 for the minute.
from 00 to 59 for the minute.
6
Select "AM" or "PM" with the [
] or [
]
key and then press the [OK] key.
AUTO SUMMER TIME SETTING
Turn on this setting to have the internal clock
automatically move forward and backward at the
beginning and end of Summer Time.
automatically move forward and backward at the
beginning and end of Summer Time.
1
Follow steps 1 through 6 of "INITIAL
PROCEDURE" (page 94).
PROCEDURE" (page 94).
2
Select "INITIAL SETTING" with the [
] or
[
] key and then press the [OK] key.
3
Select "AUTO SUMMER TIME SETTING"
with the [
with the [
] or [
] key and then press the
[OK] key.
• The setting is turned on and a checkmark appears in
the checkbox.
• If this procedure is performed when the setting is turned
on, the checkmark is cleared and the setting turned off.
DISABLE FAX PRINT HOLD
This setting is used to disable the fax print hold function,
which holds received faxes in memory instead of
printing them as they are received. (Page 30)
Normally the fax print hold function is disabled.
which holds received faxes in memory instead of
printing them as they are received. (Page 30)
Normally the fax print hold function is disabled.
1
Follow steps 1 through 6 of "INITIAL
PROCEDURE" (page 94).
PROCEDURE" (page 94).
2
Select "INITIAL SETTING" with the [
] or
[
] key and press the [OK] key.
3
Select "DISABLE FAX PRINT HOLD" with
the [
the [
] or [
] key and press the [OK] key.
• The setting (which disables fax print hold) is enabled
and a checkmark appears in the checkbox.
• If this procedure is performed when the setting is
enabled, the checkmark will be cleared and the
setting disabled (fax print hold is enabled).
setting disabled (fax print hold is enabled).
SENDING FUNCTION
These settings are used to change the default settings
(initially set at the factory) for the various fax
transmission functions to settings that better meet your
needs.
(initially set at the factory) for the various fax
transmission functions to settings that better meet your
needs.
RES. CON. SET
This setting is used to adjust the exposure level when
scanning an original to be faxed. The initial setting is
standard resolution and auto exposure mode.
scanning an original to be faxed. The initial setting is
standard resolution and auto exposure mode.
1
Follow steps 1 through 6 of "INITIAL
PROCEDURE" (page 94).
PROCEDURE" (page 94).
2
Select "SENDING FUNCTION" with the [
]
or [
] key and then press the [OK] key.
3
Select "RES. CON. SET" with the [
] or
[
] key and press the [OK] key.
4
Select the resolution setting with the [
] or
[
] key and the exposure mode with the [
]
or [
] key, and then press the [OK] key.
See page 15 for information on selecting the resolution
and contrast settings.
and contrast settings.
AUTO REDUCE TX
This setting is used to have transmitted faxes reduced to
match the size of the other machine's printing paper.
"AUTO REDUCE TX" is normally enabled. If the setting
is disabled, documents are faxed in their original size.
Because the size is not adjusted to match the size of the
printing paper, part of the received fax may be cut off.
match the size of the other machine's printing paper.
"AUTO REDUCE TX" is normally enabled. If the setting
is disabled, documents are faxed in their original size.
Because the size is not adjusted to match the size of the
printing paper, part of the received fax may be cut off.
1
Follow steps 1 through 6 of "INITIAL
PROCEDURE" (page 94).
PROCEDURE" (page 94).
2
Select "SENDING FUNCTION" with the [
]
or [
] key and then press the [OK] key.
3
Select "AUTO REDUCE TX" with the [
] or
[
] key and then press the [OK] key.
• "AUTO REDUCE TX" is enabled and a checkmark
appears in the checkbox.
• If this procedure is performed when the setting is
enabled, the checkmark will be cleared and the
setting disabled.
setting disabled.
ROTATE TX
This setting is used to select whether or not an A4, A5R
or 8-1/2" x 11" size original that is oriented vertically
or 8-1/2" x 11" size original that is oriented vertically
will be rotated to a horizontal orientation
before
transmission. In Taiwan, B5R originals are also rotated to
B5 (however, B5 originals are not rotated). Rotation is
normally enabled, and vertically oriented originals are
rotated counterclockwise. (A4, A5R and 8-1/2" x 11" size
originals that are oriented horizontally
B5 (however, B5 originals are not rotated). Rotation is
normally enabled, and vertically oriented originals are
rotated counterclockwise. (A4, A5R and 8-1/2" x 11" size
originals that are oriented horizontally
are not
rotated.) In Taiwan, B5R originals are also rotated to
B5 (however, B5 originals are not rotated).
Rotation transmission can be selected separately for
different original sizes. To disable a rotation setting,
clear the checkbox from the appropriate setting.
B5 (however, B5 originals are not rotated).
Rotation transmission can be selected separately for
different original sizes. To disable a rotation setting,
clear the checkbox from the appropriate setting.
Pegasus-E_Fax_Ex.book 100 ページ 2009年6月5日 金曜日 午後1時49分
Click on the first or last page to see other MX-FX10 (serv.man3) service manuals if exist.