MX-5500N, MX-6200N, MX-7000N (serv.man46). Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 9

MX-7000N  SIMULATION  7 – 9

66

29

Used to clear the data related to the address book (one-touch registration, 
FTP/ Desktop extension, group extension, program registration, interface 
memory box, meta data, Inbound Routing, Document Admin table).

Data clear

30

Used to check a change in the TEL/LIU status.

Operation test, check

FAX

31

Used to set the TEL/LIU output port.

Operation check

FAX

32

Used to check the received data (fixed data) from the line.

Operation test, check

FAX

33

Used to detect the line signals (BUSY TONE/CNG/CED/FNET/DTMF).

Operation test, check

FAX

34

Used to measure the communication time of the send test image data. 

Operation test, check

FAX

36

Used to perform the interface check between the MFP controller and the 
MDMC. (Data line or command line check)

Operation test, check

FAX

39

Used to set the destination.

Setting

FAX

42

Used to rewrite the power control program again to the FAX BOX.

Setting

FAX

43

Used to write the adjustment value of the power control program to the FAX 
BOX.

Setting

FAX

67

17

Used to set the printer controller memory clear and default value.

Setting

24

Used to perform the printer setting of auto color calibration. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

25

Used to perform the manual correction setting of the printer engine color 
balance. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

26

Used to perform the reference scanner target value setting of the printer 
engine auto density adjustment. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

27

Used to perform the scanner target value registration of the printer engine 
auto density adjustment.
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

28

Used to perform the scanner target value registration of the printer engine 
auto adjustment.
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

30

Used to perform delivery setting of the main unit calibration data and the 
process correction data to a client PC. (for GDI printer)
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

31

Used to clear the printer calibration value. 
* When FIERY is supported, SIM is not displayed.

Data clear

32

Used to perform the screen/color select function setting for each object. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

33

Used to perform the gamma correction (for PCL) between printer screens. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

33

Used to perform gamma correction (for GDI) between printer screens. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting