Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual online
MX-7000N SIMULATION 7 – 8
63
1
Used to check the shading correction result.
Adjustment/Setting/Operation data
check
check
Scanner
2
Used to perform shading.
Adjustment
3
Used to perform scanner color balance and color coefficient auto
adjustment.
adjustment.
Adjustment/Setting
Scanner
5
Used to perform the scanner color balance and the color coefficient auto
adjustment.
adjustment.
Adjustment/Setting
6
Used to perform the engine color balance auto adjustment pattern setting.
Adjustment/Setting
7
Used to perform the auto density setting of the engine auto adjustment
scanner target value. (Servicing)
scanner target value. (Servicing)
Adjustment/Setting
8
Used to perform the initial value reset of the engine auto adjustment scanner
target value. (Servicing)
target value. (Servicing)
Adjustment/Setting
11
Used to set the reference scanner target value for the engine auto density
adjustment.
adjustment.
Adjustment/Setting
64
1
Used to perform the self print. (Color mode)
Operation test/Check
2
Used to print the density adjustment pattern.
Operation test/Check
3
Used to perform self print (monochrome mode).
Operation test/Check
4
Used to perform the printer self print.
* When FIERY is supported, SIM is not displayed.
* When FIERY is supported, SIM is not displayed.
Operation test/Check
5
Used to perform the printer self print (PCL).
* When FIERY is supported, SIM is not displayed.
* When FIERY is supported, SIM is not displayed.
Operation test/Check
6
Used to perform the printer self print (PS).
* When FIERY is supported, SIM is not displayed.
* When FIERY is supported, SIM is not displayed.
Operation test/Check
65
1
Used to perform the touch panel (LCD display) detection position
adjustment.
adjustment.
Adjustment
Operation panel section
2
Used to check the touch panel (LCD display) detection position adjustment
result.
result.
Operation check/test
5
Used to check the operation panel key input.
Operation check/test
66
1
Used to change and check the soft switch setting.
Setting
2
Used to clear the soft switch and set the default value.
Data clear
3
Used to check the operation (read/write) of the FAX PWB memory.
Operation test, check
FAX
4
Used to check the output operation (MODEM operation) of data signal in
each data output mode of FAX. Send level: MAX
each data output mode of FAX. Send level: MAX
Operation check, test
FAX
5
Used to check the output operation (MODEM operation) of data signal in
each data output mode of FAX. Send level: Soft switch setting
each data output mode of FAX. Send level: Soft switch setting
Operation test, check
FAX
6
Used to print the confidential pass code.
User data output, check
FAX
7
Used to output the image memory data (memory send and receive).
* The confidential receive contents are also outputted.
* The confidential receive contents are also outputted.
User data output, check
FAX
8
Used to check the output operation (audio output IC operation check) of the
various audio signals of FAX. Send level: MAX
various audio signals of FAX. Send level: MAX
Operation test, check
FAX
9
Used to check the output operation (audio output IC operation) of various
audio signals of FAX. Send level: Soft switch setting
audio signals of FAX. Send level: Soft switch setting
Operation test, check
FAX
10
Used to clear all the data (memory receive and send) of the image memory.
* The confidential receive data are cleared simultaneously.
* The confidential receive data are cleared simultaneously.
Data clear
FAX
11
Used to check the output operation (MODEM operation) in the FAX G3
mode 300bps. Send level: MAX
mode 300bps. Send level: MAX
Operation test, check
FAX
12
Used to check the output operation (MODEM operation) in the FAX G3
mode 300bps. Send level: Set with the soft switch.
mode 300bps. Send level: Set with the soft switch.
Operation test, check
FAX
13
Used to set the number for the FAX dial signal output test. (In the dial signal
output test with SIM66-14 - 16, the dial number set with this simulation is
outputted.)
output test with SIM66-14 - 16, the dial number set with this simulation is
outputted.)
Setting
FAX
14
Used to set the make time in the FAX pulse dial mode (10PPS) and to
execute the dial signal output test. (The signal of the dial number set with
SIM66-13 is outputted.)
execute the dial signal output test. (The signal of the dial number set with
SIM66-13 is outputted.)
Setting/Operation test, check
FAX
15
Used to set the make time in the FAX pulse dial mode (20PPS) and to
execute the dial signal output test. (The signal of the dial number set with
SIM 66-13 is outputted.)
execute the dial signal output test. (The signal of the dial number set with
SIM 66-13 is outputted.)
Setting/Operation test, check
FAX
16
Used to perform the dial signal (DTMF) output test in the FAX tone dial
mode. (The signal of the dial number set with SIM 66-13 is outputted.)
The send level can be set to an optional level.
mode. (The signal of the dial number set with SIM 66-13 is outputted.)
The send level can be set to an optional level.
Setting/Operation test, check
FAX
17
Used to perform the dial signal (DTMF) output test in the FAX tone dial
mode. Send level: MAX
mode. Send level: MAX
Operation test, check
FAX
18
Used to perform the dial signal (DTMF) output test in the FAX tone dial
mode. Send level: Set with the soft switch.
mode. Send level: Set with the soft switch.
Operation test, check
FAX
19
Used to backup the address book data stored in the HDD. (Backup to the
Flash ROM)
Flash ROM)
Backup
20
Used to transfer the address book data stored in the Flash ROM. (Transfer
to HDD)
to HDD)
Data transfer
21
Used to print information abut FAX (various registrations, communication
management, file management, system errors, protocols).
management, file management, system errors, protocols).
Adjustment, setting, operation data
check
check
FAX
24
Used to clear the FAST memory data.
Clear
FAX
25
Used to register a FAX number for MODEM dial-in.
Setting
FAX
26
Used to register an external telephone number for MODEM dial-in.
Setting
FAX
Main
Sub
Function (Purpose)
Purpose
Section
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.