Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 50
d. Removal of front inside upper cover
1) Remove the four screws [1], and remove the front inside upper
1) Remove the four screws [1], and remove the front inside upper
cover [2].
e. Removal of inlet feed unit
1) Disconnect the connectors [1] at four positions, and remove
1) Disconnect the connectors [1] at four positions, and remove
the harness from the clamp [2].
2) Remove the four screws [3].
3) Open the upper cover [4], and remove the inlet feed unit [5].
3) Open the upper cover [4], and remove the inlet feed unit [5].
f. Removal of No. 2 paper deflection plate
1)
1)
Disengage the pawl [1] of the No. 2 paper deflection plate
bearing, and pull the No. 2 paper deflection plate shaft [2] to
the back.
bearing, and pull the No. 2 paper deflection plate shaft [2] to
the back.
2)
Remove the front shaft of the No. 2 paper deflection plate [3]
from the front side plate, and remove the No. 2 paper deflec-
tion plate.
from the front side plate, and remove the No. 2 paper deflec-
tion plate.
D. Electrical system
(1) Finisher controller PCB
a. Finisher controller PCB
a-1. Removal of rear cover
1)
1)
Slide the tray cable cover [1] to the tray side, and remove it.
2)
Remove the six screws [2], and lift and remove the rear cover
[3].
[3].
* For MX-FNX3, refer to 1-A-(2)-a.
[1]
[2]
[1]
[1]
[1]
[2]
[3]
[3]
[5]
[4]
[2]
[1]
[3]
1
2
[2]
[1]
[3]
[2]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man19) service manuals if exist.