Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 47
k. Removal of paper folding roller
1) Disconnect the connectors [1] at two positions, and remove the
1) Disconnect the connectors [1] at two positions, and remove the
harness from the edge saddle [2] and the clamp [3].
2) Disconnect the connectors [4] at two positions, and remove the
harness from the edge saddle [5] at four positions.
3) Remove the three screws [6], and take out the paper folding/
paper pushing motor base [7].
4) Disengage the hooks on the upper sides of the tension spring
front [8] and the tension spring rear [9].
5)
Remove the two C-rings [10] at the back, and remove the sen-
sor flag [11] and the two bearings [12].
sor flag [11] and the two bearings [12].
6)
Remove the two C-rings [13] on the front side, and remove the
two gears [14].
two gears [14].
7)
Remove the two bearings [15].
8)
Open the saddle delivery tray [16].
9)
Remove the two screws [17], and remove the two alignment
plates [18].
plates [18].
10) Shift the two paper folding rollers [19] to the front side, and
remove it in the delivery direction.
[1]
[3]
[2]
[5]
[4]
[6]
[4]
[5]
[7]
[8]
[9]
[12]
[10]
[11]
[14]
[13]
[15]
[16]
[18]
[17]
[17]
[19]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man19) service manuals if exist.