Read Sharp MX-5500N / MX-6200N / MX-7000N (serv.man19) Peripheral online
MX-FNX4 DISASSEMBLY AND ASSEMBLY 6 – 49
2) Remove the four screws [3].
3) Open the upper cover [4], and remove the inlet feed unit [5].
3) Open the upper cover [4], and remove the inlet feed unit [5].
f. Removal of No. 1 paper deflection plate
1) Disengage the pawl [1] of the No. 1 paper deflection plate
1) Disengage the pawl [1] of the No. 1 paper deflection plate
bearing, and pull the No. 1 paper deflection plate shaft [2] to
the back.
the back.
2) Remove the front shaft of the No. 1 paper deflection plate [3]
from the front side plate, and remove the No. 1 paper deflec-
tion plate.
tion plate.
(11) No. 2 paper deflection plate (MX-FNX4)
a. Removal of front cover
1)
1)
Open the front cover [1], and remove the clip [2].
2)
Lift the front cover [1], and remove it.
b. Removal of rear cover
1)
1)
Slide the tray cable cover [1] to the tray side, and remove it.
2)
Remove the six screws [2], and lift and remove the rear cover
[3].
[3].
c. Removal of saddle inlet front inside cover
1)
1)
Remove the three screws [1], and remove the saddle inlet front
inside cover [2].
inside cover [2].
[3]
[3]
[5]
[4]
[2]
[1]
[3]
1
2
[1]
[2]
[2]
[1]
[3]
[2]
[1]
[2]
[1]
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man19) service manuals if exist.