Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man35) User Guide / Operation Manual online
12
General Problems
For copy mode, you can set copying
to black & white priority. For printing
mode, you can set printing to black &
white priority in the printer driver
settings.
to black & white priority. For printing
mode, you can set printing to black &
white priority in the printer driver
settings.
■ Although this does not prohibit color copies, you can set the color mode to black
& white priority as a means of reducing the number of color pages printed.
Copying
⇒ Set "Setting mode(administrator)" → [System Settings] → [Copy Settings] →
⇒ Set "Setting mode(administrator)" → [System Settings] → [Copy Settings] →
[Initial Status Settings] → [Color Mode] to [B/W]
Printing
⇒ Select [Grayscale] on the [Main] tab of the printer driver.
⇒ Select [Grayscale] on the [Main] tab of the printer driver.
THE ORIGINAL SIZE IS NOT AUTOMATICALLY
SELECTED OR THE WRONG SIZE IS SELECTED
Check
Solution
Is the original curled or folded?
■ Straighten the original.
The correct original size cannot be detected if the original is curled or folded.
Did you place an original smaller than
A5 (5-1/2" x 8-1/2") size?
A5 (5-1/2" x 8-1/2") size?
■ Select the original size manually.
Original sizes smaller than A5 (5-1/2" x 8-1/2") cannot be detected. When
scanning a small original on the document glass, it is convenient to place a blank
sheet of paper on top of the original which is the same size (A4 (8-1/2" x 11"), B5
(8-1/2" x 11"R), etc.) as the paper that you wish to use for printing.
scanning a small original on the document glass, it is convenient to place a blank
sheet of paper on top of the original which is the same size (A4 (8-1/2" x 11"), B5
(8-1/2" x 11"R), etc.) as the paper that you wish to use for printing.
THE DISPLAYED BYPASS TRAY PAPER SIZE IS
NOT CORRECT
Check
Solution
Do the bypass tray guides match the
width of the loaded paper?
width of the loaded paper?
■ Set the bypass tray guides to the width of the paper.
When loading paper in the bypass tray, be sure to pull out the extension guide to
enable the paper size to be detected correctly.
enable the paper size to be detected correctly.
THE ORIGINAL MISFEEDS (AUTOMATIC DOCUMENT
FEEDER)
Check
Solution
Is too much paper loaded into the
document feeder tray?
document feeder tray?
■ Make sure that the stack of paper in the tray is not higher than the indicator line.
► Placing the original and adding paper (page 5)
Check
Solution
!
?
!
?
!
?
!
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man35) service manuals if exist.