Read Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man35) User Guide / Operation Manual online
15
General Problems
THE IMAGE IS SKEWED ON THE PAPER
Check
Solution
Is too much paper loaded into the
bypass tray?
bypass tray?
■ Reload the paper. Load no more than the maximum number of sheets and do not
exceed the indicator line.
The maximum number of sheets varies depending on the paper type setting.
Are the bypass tray guides adjusted
to the width of the paper?
to the width of the paper?
■ Adjust the bypass tray guides to the width of the paper so that they slightly
contact the sides of the paper.
Are the original guides adjusted to the
width of the paper?
width of the paper?
■ Adjust the original guides to the width of the paper.
Is the control plate auxiliary block
attached to the cassette? (When
using SRA3)
attached to the cassette? (When
using SRA3)
■ Attach the control plate auxiliary block.
LINES APPEAR IN THE SCANNED IMAGE
Check
Solution
Are the scanning areas of the
document glass or automatic
document feeder dirty?
document glass or automatic
document feeder dirty?
■ Clean the scanning areas of the document glass or automatic document feeder.
► Maintenance (page 6)
Is the bypass feed roller dirty?
■ Clean the surface of the bypass feed roller.
► Maintenance (page 6)
Did you clean the main charger of the
photoconductive drum?
photoconductive drum?
■ Clean the main charger of the photoconductive drum. For details on cleaning,
refer to the User's Manual.
Did you clean the PT charger of the
primary transfer belt?
primary transfer belt?
■ Clean the PT charger of the primary transfer belt. For details on cleaning, refer to
the User's Manual.
Did you clean the laser unit?
■ Clean the laser unit. For details on cleaning, refer to the User's Manual.
SMUDGES APPEAR ON PRINTED OUTPUT
Check
Solution
Are you using paper that is not within
the specifications?
the specifications?
■ Use SHARP-recommended paper.
Using paper that is for other models or special paper that is not supported may
result in misfeeds, creases, or smudges.
⇒ - "SUPPLIES" in Start Guide
result in misfeeds, creases, or smudges.
⇒ - "SUPPLIES" in Start Guide
?
!
?
!
?
!
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man35) service manuals if exist.