MX-1800N (serv.man14). Section 6 - Adjustments - Sharp Copying Equipment Service Manual (repair manual). Page 62

Read Sharp MX-1800N (serv.man14) Service Manual online

MX-1800N  ADJUSTMENTS  6 – 62
5) Touch [EXCUTE] key.
The adjustment pattern is printed out.
6) Set the adjustment pattern on the document table. (Any direc-
tion)
Note: Fit the adjustment pattern correctly with the document
guide.
7) Touch [EXCUTE] key.
The following items are automatically adjusted.
* Print image lead edge image position adjustment
* Print image off-center adjustment
8) Touch [OK] key.
The adjustment result becomes valid.
Perform procedures 4) to 7) for each paper feed tray.
 
27-C
Copy lead edge image reference position 
adjustment, image off-center, sub scanning 
direction image magnification ratio 
automatic adjustment
1) Enter the SIM50-28 mode.
2) Select [OC ADJ] with the key button.
3) Select the paper feed tray with paper in it with the key button.
(Any paper size will do.)
4) Touch [EXCUTE] key.
The adjustment pattern is printed out.
5)
Set the adjustment pattern on the document table. (Any direc-
tion)
Note: Fit the adjustment pattern correctly with the document
guide.
6)
Touch [EXCUTE] key.
The following items are automatically adjusted.
Copy lead edge image reference position adjustment,
image off-center, sub scanning direction image magnifica-
tion ratio automatic adjustment
7)
Touch [OK] key.
The adjustment result becomes valid.
 
27-D
SPF mode image off-center, image lead 
edge position, sub scanning direction 
image magnification ratio automatic 
adjustment
Refer to the RSPF (MX-RPX1) SM.
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT : SERVICE
OC ADJ
BK-MAG ADJ
SPF ADJ
SETUP/PRINT ADJ
RESULT
DATA
1/1
0
CLOSE
0
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT㧦SERVICE
EXECUTE
1/1
MFT
CS1
CS2
CLOSE
0
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT SERVICE
CLOSE
EXECUTE
PLEASE SET THE SIT CHART PAPER ON THE OC
THEN PRESS [EXECUTE] TO START
REPRINT
0
SIMULATION NO.50-28
TEST
AUTO IMAGE POSITION ADJUSTMENT SERVICE
CLOSE
OC
LEAD
 
OFFSET
SUB
RESCAN
REPRINT
OK
RETRY
DATA
Page of 62
Display

Download Sharp MX-1800N (serv.man14) Service Manual (Repair Manual)

Found More:

MX-1800N (serv.man14) Service Manuals

Preview DownloadPagesSize
MX-1800N (serv.man6) Installation Manual Service Manual 88 21.98 MB
MX-1800N (serv.man7) Circuit Diagram Service Manual 127 17.88 MB
MX-1800N (serv.man8) Front Back Covers Service Manual 5 400.93 KB
MX-1800N (serv.man9) Note for Servicing Service Manual 2 226.95 KB
MX-1800N (serv.man10) Section 1 - Product Outline Service Manual 2 377.16 KB
MX-1800N (serv.man11) Section 2 - Specifications Service Manual 14 346.94 KB
MX-1800N (serv.man12) Section 3 - Consumable Parts Service Manual 2 207.25 KB
MX-1800N (serv.man13) Section 5 - External View Internal Structure Service Manual 17 1.47 MB
MX-1800N (serv.man15) Section 7 - Simulation Service Manual 86 2.15 MB
MX-1800N (serv.man16) Section 8 - Self Diagnostics Trouble Codes Service Manual 24 553.93 KB
MX-1800N (serv.man17) Section 9 - Maintenance Service Manual 14 2.89 MB
MX-1800N (serv.man18) Section 10 - Rom Version Up Service Manual 3 551.22 KB
MX-1800N (serv.man19) Section 11 - Electrical Service Manual 32 546.84 KB
MX-1800N (serv.man20) Section 12 - Others Service Manual 7 570.47 KB
MX-1800N (serv.man21) Details of each Section - A External Outfit Section. Service Manual 3 1023.3 KB
MX-1800N (serv.man22) Details of each Section - B Operation Panel Section. Service Manual 3 577.88 KB
MX-1800N (serv.man23) Details of each Section - C Scanner Section. Service Manual 6 1.25 MB
MX-1800N (serv.man24) Details of each Section - D Manual Paper Feed Section. Service Manual 6 1.78 MB
MX-1800N (serv.man25) Details of each Section - E Tray Paper Feed Section Service Manual 7 2.93 MB
MX-1800N (serv.man26) Details of each Section - F Paper Transport Section Service Manual 4 1.08 MB
MX-1800N (serv.man27) Details of each Section - G Duplex Section Service Manual 5 2 MB
MX-1800N (serv.man28) Details of each Section - H LSU Section Service Manual 4 1.5 MB
MX-1800N (serv.man29) Details of each Section - i Photoconductor Section Service Manual 5 2.49 MB
MX-1800N (serv.man30) Details of each Section - J Toner Supply Section Service Manual 2 636.29 KB
MX-1800N (serv.man31) Details of each Section - K Developing Section Service Manual 5 1.61 MB
MX-1800N (serv.man32) Details of each Section - L Transfer Section Service Manual 9 8.24 MB
MX-1800N (serv.man33) Details of each Section - M Process Control Sensor, Registration Sensor Section Service Manual 2 545.41 KB
MX-1800N (serv.man34) Details of each Section - N Fusing Section Service Manual 6 2.73 MB
MX-1800N (serv.man35) Details of each Section - O Paper Exit Section. Service Manual 4 2.22 MB
MX-1800N (serv.man36) Details of each Section - P Drive Section. Service Manual 5 2.37 MB
MX-1800N (serv.man37) Details of each Section - Q PWB Section. Service Manual 6 1.65 MB
MX-1800N (serv.man38) Details of each Section - R Fan and Filter Section. Service Manual 2 687.11 KB
MX-1800N (serv.man39) Details of each Section - S Sensor, Switch section. Service Manual 2 472.23 KB
MX-1800N (serv.man40) User's Guide (Supplied as pdf file on m c's Hard Disk Drive). User Guide / Operation Manual 61 2.11 MB
MX-1800N (serv.man41) System Settings Guide (Supplied as pdf file on m c's Hard Disk Drive). User Guide / Operation Manual 127 2.61 MB
MX-1800N (serv.man42) Scanner Guide (Supplied as pdf file on m c's Hard Disk Drive). User Guide / Operation Manual 127 3.27 MB
MX-1800N (serv.man43) Printer Guide (Supplied as pdf file on m c's Hard Disk Drive). User Guide / Operation Manual 61 1.88 MB
MX-1800N (serv.man44) Fax Guide (Supplied as pdf file on m c's Hard Disk Drive). User Guide / Operation Manual 127 4.25 MB
MX-1800N (serv.man45) Copier Guide (Supplied as pdf file on m c's Hard Disk Drive). User Guide / Operation Manual 127 4.88 MB
MX-1800N (serv.man46) Document Filing Guide (Supplied as pdf file on m c's Hard Disk Drive). User Guide / Operation Manual 47 1.17 MB
MX-1800N Mac OS10.8 Driver Rquires Postscript option. Mac OS Drivers 2.94 MB
MX-1800N (serv.man5) Section 2 - Specifications Specification 14 346.94 KB
MX-1800N (serv.man52) Parts change for productivity improvement. Technical Bulletin 3 184.15 KB
MX-1800N (serv.man53) Design change of MF Tray 2 Upper. Technical Bulletin 2 216.35 KB
MX-1800N (serv.man54) Preventing detection of waste toner bottle full. Technical Bulletin 2 101.04 KB
MX-1800N (serv.man55) Temporary change in containment bag for starting powder. Technical Bulletin 1 102.62 KB
MX-1800N (serv.man56) Starting Powder List (This list takes priority over information in Service Manuals). Technical Bulletin 4 66.25 KB
MX-1800N (serv.man57) Material change Rotation Plate Sheet. Technical Bulletin 3 290.1 KB
MX-1800N (serv.man58) Recommended shutdown procedure and Power Cycling of MFD Technical Bulletin 1 186.43 KB
MX-1800N (serv.man59) IMPORTANT Handling of EEPROM's. Technical Bulletin 5 203.32 KB
MX-1800N (serv.man60) Change in material of pick up roller. Technical Bulletin 2 77.2 KB
MX-1800N (serv.man61) CCE-1306 A REMINDER TO INSERT CONNECTORS TO DRIVER PWB COMPLETELY Technical Bulletin 2 237.57 KB
MX-1800N (serv.man62) CCE-1286 COUNTERMEASURE FOR NOISE FROM TN PIPE BK UNIT Technical Bulletin 2 126.49 KB
MX-1800N (serv.man63) CHANGE OF PHOTO SENSOR. Technical Bulletin 2 165.18 KB
MX-1800N (serv.man64) CCE-1076 WHITE STREAK S DUE TO THE DOCTOR COVER SEAL OR INNER BLADE WEAR. Technical Bulletin 3 280.8 KB
MX-1800N (serv.man65) CHANGE OF MICROSWITCH RSPF-DSPF SWITCH Technical Bulletin 3 146.49 KB
MX-1800N (serv.man66) PREVENTION OF F2-6 ERROR. TONER CARTRIDGE DRIVE AND STORAGE NOTES. Technical Bulletin 3 154 KB
MX-1800N (serv.man67) IMPROVEMENTS FOR THE PREVENTION OF LEAKING FROM THE PROCESS ELECTRODE COVER Technical Bulletin 2 57.54 KB
MX-1800N (serv.man68) TRANSPORT JAM FROM THE OPTION DESK. (PPD1_S3 etc.) Technical Bulletin 2 71.46 KB
MX-1800N (serv.man69) COUNTERMEASURES FOR THE 2ND TRANSFER DRIVING PULLEY BELT COMING LOOSE Technical Bulletin 2 88.41 KB
MX-1800N (serv.man70) REMOVAL OF LCD MYLAR A B DUE TO CHANGES TO THE 8.1 TOUCH PANEL Technical Bulletin 1 27.59 KB
MX-1800N (serv.man71) STRENGTH INCREASE TO BEADED PART OF THE 2ND TRANSFER BELT Technical Bulletin 1 72.96 KB
MX-1800N (serv.man72) IMPROVEMENTS TO THE TRANSPORT ROLLER POWER OF THE 2ND CASSETTE PAPER FEED UNIT Technical Bulletin 2 183.83 KB
MX-1800N (serv.man73) INCREASE IN VERTICAL TRANSFERABILITY MARGIN OF RIGHT LOWER DOOR Technical Bulletin 2 110.47 KB
MX-1800N (serv.man74) FIX TO INCREASE THE MARGIN THAT THE FAN MOTOR FASTENER WILL NOT BECOME STRIPPED Technical Bulletin 2 49.07 KB
MX-1800N (serv.man75) SUPPORT AGAINST SCUFFING THE PHOTORECEPTOR DRUM WHEN PULLING OUT THE DV UNIT Technical Bulletin 2 124.72 KB
MX-1800N (serv.man76) FIX FOR THE ABNORMAL NOISE (CLICKING) CREATED BY THE FUSING UNIT UPPER HEAT ROLLER RECEIVER Technical Bulletin 2 75.17 KB
MX-1800N (serv.man77) MXDEX2 - COUNTERMEASURES FOR DPFD2_S, etc. CAUSED BY CARRYING FORCE DECREASE BECAUSE OF PAPER POWDERS Technical Bulletin 1 26.09 KB
MX-1800N (serv.man78) DAMAGE ON DRUM SURFACE CAUSED WHEN DV UNIT IS PULLED OUT Technical Bulletin 2 154.79 KB
MX-1800N (serv.man79) H4-30 ERROR CAUSED BY INSUFFICIENT CRIMPING AT THE TS-HL MAIN HARNESS FASTEN TERMINAL AT THE TOP OF THE FUSING UNIT Technical Bulletin 2 84.74 KB
MX-1800N (serv.man80) ISSUING EXPLANATORY MATERIAL OF JOB LOG CODES. Technical Bulletin 13 160.14 KB
MX-1800N (serv.man81) JAM (APPD1_N) RESULTING FROM ADU FOLLOWER ROLLER SPRING COMING-OFF Technical Bulletin 2 119.64 KB
MX-1800N (serv.man82) CHANGE OF SHAPE OF PROCESS F COVER Technical Bulletin 2 44.85 KB
MX-1800N (serv.man83) L4-31 TROUBLE CODE OCCURRENCE Technical Bulletin 2 44.8 KB
MX-1800N (serv.man84) IMPROVEMENT FOR PRECISION OF DETECTING BEING FULL OF WASTE TONER Technical Bulletin 2 45.22 KB
MX-1800N (serv.man85) STRIPE PRINTING IN DRUM AXIS DIRECTION RESULTING FROM CLOUDY POLYGON MIRROR IN LSU Technical Bulletin 1 27.89 KB
MX-1800N (serv.man86) CONTAMINATION OF WHITE CALIBRATION SHEET ON SPF GLASS UNIT Technical Bulletin 2 67.26 KB
MX-1800N (serv.man87) HANDLING TROUBLE CODE F2-40 INVOLVING LEAK FROM PROCESS ELECTRODE Technical Bulletin 2 129.97 KB
MX-1800N (serv.man88) PAPER FEED JAM (DPFD1_N4, ETC.) Technical Bulletin 2 67.87 KB
MX-1800N (serv.man89) BREAKAGE OF PAPER EMPTY ACTUATOR Technical Bulletin 2 76.68 KB
MX-1800N (serv.man90) INCORRECT DETECTION OF WASTE TONER BOX FULL Technical Bulletin 3 132.89 KB
MX-1800N (serv.man91) COUNTERMEASURES FOR F2-40 TROUBLE Technical Bulletin 2 85.71 KB
MX-1800N (serv.man92) COUNTERMEASURE TO COPE WITH L4-06 TROUBLE,AND OR YELLOW COLOUR DROPPING OUT Technical Bulletin 2 101.91 KB
MX-1800N (serv.man93) IMPROVEMENT OF IMAGE UNEVENNESS Technical Bulletin 2 81.7 KB
MX-1800N (serv.man94) IMPROVEMENT OF E7-11 SHADING TROUBLE. Technical Bulletin 2 92.88 KB
MX-1800N (serv.man95) REPLACEMENT OF UPPER HEAT ROLLER. Technical Bulletin 2 78.58 KB
MX-1800N (serv.man96) STRENGTHENING THE SPRING ATTACHMENT HOLE OF TENSION HOLDER A ON RSPF. Technical Bulletin 1 76.72 KB
MX-1800N (serv.man97) REMEDY FOR OPC LAYER S PEELING-OFF Technical Bulletin 2 107.4 KB
MX-1800N (serv.man98) INFORMATION OF OPERATION PROCEDURE FOR REPLACING THE MFP BOARD Technical Bulletin 2 59.18 KB
MX-1800N (serv.man99) REDUCING UNEVEN CHARGE (IMAGE STREAKING) Technical Bulletin 2 80.43 KB
MX-1800N (serv.man100) IMPROVEMENT OF UPPER HEAT ROLLER AGAINST WRINKLE. Technical Bulletin 1 74.31 KB
MX-1800N (serv.man101) CPFD2 JAMMING (OR OTHER) OCCURS FROM MISSING TRANSPORT LOWER GEAR PULLEY. Technical Bulletin 2 100.59 KB
MX-1800N (serv.man102) Staple cartridge As Service Part Technical Bulletin 1 45.97 KB
MX-1800N (serv.man103) ROM Upgrade Technical Bulletin 3 39.21 KB
MX-1800N (serv.man104) COUNTER MEASURES FOR WASTE TONER AGITATION SHAFT DEVIATION IN WASTE TONER BOTTLE Technical Bulletin 2 150.96 KB
MX-1800N (serv.man105) IMPROVEMENT IN FULL DETECT LEVER RETURN PERFORMANCE Technical Bulletin 2 85.02 KB
MX-1800N (serv.man106) CHANGE OF RSPF HEIGHT AJDUSTMENT METHOD Technical Bulletin 1 17.48 KB
MX-1800N (serv.man107) STRENGTH IMPROVEMENT OF THE OUTPUT AXIS GEAR OF THE LIFT MOTOR A Technical Bulletin 2 81.6 KB
MX-1800N (serv.man108) CHANGE OF THE MEMORY PWB ATTACHING PROCEDURE TO THE MFP PWB Technical Bulletin 1 17.74 KB
MX-1800N (serv.man109) 001-NEW SET OF SERVICE PARTS THAT COMBINES THE FILTER COVER WITH TONER FILTER. Technical Bulletin 1 64.34 KB
MX-1800N (serv.man50) Pastel Light Combined Firmware Version E1.19.L0.a0 Driver / Update 24.96 MB
MX-1800N (serv.man51) (For use with DSK only) Driver / Update 25.15 MB
MX-1800N (serv.man2) NEW EEPROM Programming Request Form Handy Guide 3 333.07 KB
MX-1800N (serv.man3) GENERAL PROCEDURE FOR COLOUR CALIBRATION SET-UP Handy Guide 2 83.06 KB
MX-1800N (serv.man4) August 2007 Version 4 revised handy guide (Includes pastel light, Pastel and C-Jupiter) Handy Guide 53 1 MB
MX-1800N (serv.man47) How To Read A Main Machine Serial Number FAQ 1 16.5 KB
MX-1800N (serv.man48) UPDATED PJL PCL PS Command Lists FAQ 128.83 KB
MX-1800N (serv.man49) How to connect MX colour product to Linux UNIX systems using CUPS FAQ 9 1.45 MB

Random: