AR-PE1 (serv.man41). ARPE1-002 Setting up the ARPE1 Fiery Controller on a Windows NT4 Network - Sharp Copying Equipment Technical Bulletin (repair manual). Page 8

Sharp Electronics (UK) Ltd., NIS Systems Support

NIS Bulletin 022.doc

Page:  8 of 16

Colour Mode

The default setting is CMYK , which means that printing is performed in colour. The
alternative setting is greyscale.

Print  To PS

When set to Yes, a Postscript error page will be output from the machine if a postscript
error occurs. As default, this setting is set to No and so if a postscript error occurs the print
job will simply be flushed from the system.

Allow Courier Substitution

If the fonts requested in the print job are not in the printer or within the print job, a
postscript error could occur. To overcome this, set this setting to Yes and any missing
fonts will be replaced with the Courier font. This ensures that at least you obtain your
printed document albeit with the altered font.

Print Cover Page

Is a cover page required before every printed job? The default is No.

Select Yes when prompted to Save Changes?  Press the OK key.

Scroll up the screen and select Exit Setup. The ARPE1 will reboot.