Read Sharp AR-NS2 (serv.man4) User Guide / Operation Manual online
14
Using the Network Scanner
Setting the Resolution
1
Press the RESOLUTION key.
2
Press the
keys to select the resolution, and then press the
OK key.
●
200 dpi, 300 dpi, or 600 dpi can be selected.
NOTE
●
The resolution is initially set to 300 dpi as a default value. A resolution of 200 dpi or 300
dpi produces sufficiently clear image data for normal text originals. (200 dpi is equivalent
to the "Fine" character mode used for facsimiles).
The 600 dpi setting should only be used in cases where high-clarity image reproduction is
required, such as a photograph or an illustration. Note that a high resolution setting will
result in a larger file size, and transmission may not be successful if there is insufficient
disk capacity in the server to which the image is sent (or if the administrator of the server
has restricted the file size). If transmission is not successful, you can try such measures
as reducing the number of scanned pages in the file or reducing the scan size setting for
the original (page 15).
dpi produces sufficiently clear image data for normal text originals. (200 dpi is equivalent
to the "Fine" character mode used for facsimiles).
The 600 dpi setting should only be used in cases where high-clarity image reproduction is
required, such as a photograph or an illustration. Note that a high resolution setting will
result in a larger file size, and transmission may not be successful if there is insufficient
disk capacity in the server to which the image is sent (or if the administrator of the server
has restricted the file size). If transmission is not successful, you can try such measures
as reducing the number of scanned pages in the file or reducing the scan size setting for
the original (page 15).
Setting the Format
1
Press the FORMAT key and then select the file type with the
keys.
keys.
●
Either TIFF or PDF can be selected for the file type of the image data to be created,
and uncompressed, G3, or G4 can be selected for the compression format.
and uncompressed, G3, or G4 can be selected for the compression format.
●
Select one of the following settings: "TIFF (uncompressed)", "TIFF G3", "TIFF G4",
"PDF (uncompressed)", "PDF G3", or "PDF G4".
"PDF (uncompressed)", "PDF G3", or "PDF G4".
hyo2-arns2-e.book 14 ページ 2001年5月18日 金曜日 午前12時21分
Click on the first or last page to see other AR-NS2 (serv.man4) service manuals if exist.