Read Sharp AR-NS2 (serv.man4) User Guide / Operation Manual online
10
Using the Network Scanner
2
Insert the original in the Single Pass Feeder (SPF) or Reversing
Single Pass Feeder (RSPF), or place it on the platen glass.
Single Pass Feeder (RSPF), or place it on the platen glass.
●
For detailed information on setting an original, refer to your copier manual.
●
When using the platen glass, place the original face down. When using the SPF or
RSPF, insert the original face up. For information on the orientation of the original,
refer to page 17.
RSPF, insert the original face up. For information on the orientation of the original,
refer to page 17.
●
If your Digital Laser Copier/Printer is equipped with an optional Reversing Single
Pass Feeder (AR-RP3) and you wish to scan a two-sided document, follow the
steps on page 16.
Pass Feeder (AR-RP3) and you wish to scan a two-sided document, follow the
steps on page 16.
3
If needed, select a setting for the quality, density, resolution,
format, and/or original size.
format, and/or original size.
●
Initial settings are quality: text/photo, density: auto, resolution: 300 dpi, format: TIFF
G4 single. To change a setting, refer to pages 13 - 15.
G4 single. To change a setting, refer to pages 13 - 15.
●
If the original is smaller than A5 or 5-1/2" x 8-1/2", the original size will not appear
correctly in the display. In some cases, nothing will appear. In this case, press the
ORIGINAL SIZE key to specify the original size. (page 15)
correctly in the display. In some cases, nothing will appear. In this case, press the
ORIGINAL SIZE key to specify the original size. (page 15)
●
If no changes are necessary, proceed to step 4.
4
Press the ADDRESS key.
hyo2-arns2-e.book 10 ページ ２００１年５月１８日 金曜日 午前１２時２１分
Click on the first or last page to see other AR-NS2 (serv.man4) service manuals if exist.