AR-NS2 (serv.man4). (AR235 275)Scanner Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 13

Using the Network Scanner

●

Transmission begins after all the pages of the original have been scanned.

●

The original is scanned. If you have another page to scan, change pages and then
press the START key. Repeat as necessary for further pages.
After the last page is scanned, press the # key to begin transmission.
If you take no action for 60 seconds after the last page is scanned, the machine
automatically begins transmission.

●

To cancel a transmission operation, press the CLEAR key or the CLEAR ALL key. If
"Reading" or "Sending" appears in the message display when the CLEAR key or the
CLEAR ALL key is pressed, a message asking you to confirm the cancellation appears.
Select "YES" and then press the OK key to cancel the operation. If you pressed the
CLEAR key, the destination and scan settings are saved.

●

If you exceed the number of pages that can be scanned while scanning an original,
"Memory is full" will appear in the message display. To send the data that has been
scanned to that point, press the OK key. To cancel the transmission, press the CLEAR
key or the CLEAR ALL key.

●

If a misfeed occurs while an original is being scanned, remove the original according to
the instructions in the message display. To resume scanning after removing the misfeed,
press the START key.

3-arns2-e.fm  12 ページ  ２００１年５月１８日　金曜日　午前１０時４７分