Read Sharp AR-NS2 (serv.man4) User Guide / Operation Manual online
16
Using the Network Scanner
Setting Duplex Scanning (When the Optional RSPF is installed)
If the Digital Laser Copier/Printer is equipped with an optional Reversing Single Pass Feeder (AR-
RP3) and you have loaded a two-sided original, follow the steps below to select duplex scanning.
RP3) and you have loaded a two-sided original, follow the steps below to select duplex scanning.
1
Press the DUPLEX SCAN key.
2
Select "2-SIDED" with the
key and then press the OK key.
●
The screen for selecting the two-sided original type appears.
3
Select the duplex style with the
keys, and then press the OK
key.
●
Select "BOOKLET" or "TABLET" for the duplex style. Press the
or
key to
toggle the selection.
NOTE
●
About booklet and tablet
Two-sided originals bound at the side are "BOOKLET". Two-sided originals bound at the
top are "TABLET".
Two-sided originals bound at the side are "BOOKLET". Two-sided originals bound at the
top are "TABLET".
Booklet
Tablet
hyo2-arns2-e.book 16 ページ ２００１年５月１８日 金曜日 午前１２時２１分
Click on the first or last page to see other AR-NS2 (serv.man4) service manuals if exist.