Read Sharp AR-FX10 Service Manual online
AR-FX10 UNPACKING AND INSTALLATION 5 - 2
(6)
Attach the fax box unit.
1) Remove the rear cabinet securing screw.
2) Insert the shaft of the fax box mounting plate into the mount-
ing section of the fax box.
3) Secure the fax box unit with screw B and the rear cabinet
securing screw that has been removed at 1).
(7)
Connect the fax power supply connector.
1) Remove the connector cover securing screw from the back of
the printer and remove the connector cover.
2) Ensure that the fax power switch is set to "OFF."
3) Connect the fax power supply connector to the connector of
the printer and secure it by tightening the three screws.
(8)
Connect the fax interface cable.
Connect the connector of the fax interface cable to the connector
of the fax box unit.
of the fax box unit.
• If mounting of additional fax memory is not needed, pro-
ceed to step (10).
Operation for mounting additional fax memory
(AR-MM9)
(AR-MM9)
(9)
Mount the additional fax memory to the ICU PWB.
1) Remove the two screws from the upper output tray and slide
the tray in the direction of the arrow to remove it.
2) Remove the two screws from the ICU cover and slide the
cover in the direction of the arrow to remove it.
3) Mount the additional fax memory to the socket of the ICU
PWB.
4) Reattach the ICU cover to its original position and secure it
with the two screws.
5) Reattach the upper output tray to its original position and
secure it with the two screws.
Screw B
Screws
Screws
OFF
Additional fax memory
Screws
Upper output tray
ICU cover
Screws
ICU
Click on the first or last page to see other AR-FX10 service manuals if exist.