Read Sharp AR-FX10 Service Manual online
AR-FX10 UNPACKING AND INSTALLATION 5 - 4
(13) Clear the image memory.
• If an additional memory (AR-MM9) has been mounted, be
sure to carry out this step.
If no additional memory has been mounted, this step is not
necessary.
If no additional memory has been mounted, this step is not
necessary.
1) Switch the operation panel to the copy mode and use the key
operation [P]
→
[
∗
]
→
[C] and [
∗
] to enter the simulation
mode.
2) Use the 10-key pad to enter [66] in the main code entry
screen and press the [START] key.
3) Use the 10-key pad to enter [10] in the sub-code entry screen
and press the [START] key.
4) In the submenu screen, press [EXECUT] and [YES].
5) The screen shown on the right is displayed and memory clear
operation is executed.
6) After several minutes, memory clear operation is completed.
(When highlighting of the [YES] key disappears, the clear
operation is complete.)
operation is complete.)
If you press the [CA] key, the screen shown on the right is dis-
played. Turn off both power switches and then on again.
played. Turn off both power switches and then on again.
(14) Connect the line cable to the fax box unit.
Connect the line cable to the fax box unit.
SIMULATION
INPUT A MAIN PROGRAM NUMBER BY 10-KEY PAD, AND PRESS START.
TEST
CLOSE
66
0
SIMULATION NO. 66
INPUT A SUB PROGRAM NUMBER BY 10-KEY PAD, AND PRESS START.
TEST
CLOSE
10
0
1:FAX SOFT SW. SETTING
2:FAX SOFT SW. CLEAR
(WITHOUT ADJUSTMENT VALUE)
3:FAX PWB MEMORY CHECK
4:SIGNAL OUTPUT CHECK(LEVEL MAX)
5:SIGNAL OUTPUT CHECK(SOFT SW.)
6:PASS CODE PRINT OUT
2:FAX SOFT SW. CLEAR
(WITHOUT ADJUSTMENT VALUE)
3:FAX PWB MEMORY CHECK
4:SIGNAL OUTPUT CHECK(LEVEL MAX)
5:SIGNAL OUTPUT CHECK(SOFT SW.)
6:PASS CODE PRINT OUT
7:IMAGE MEMORY PRINT OUT
8:MESSAGE OUTPUT CHECK
(LEVEL MAX)
9:MESSAGE OUTPUT CHECK(SOFT SW)
10:IMAGE MEMORY CLEAR
11:300bps SIGNAL OUTPUT
8:MESSAGE OUTPUT CHECK
(LEVEL MAX)
9:MESSAGE OUTPUT CHECK(SOFT SW)
10:IMAGE MEMORY CLEAR
11:300bps SIGNAL OUTPUT
(LEVEL MAX)
1 / 3
SIMULATION NO. 66-10
IMAGE MEMORY CLEAR
TEST
CLOSE
0
YES
ARE YOU SURE?
NO
EXECUTE
SIMULATION NO. 66-10
IMAGE MEMORY CLEAR
TEST
CLOSE
0
ARE YOU SURE?
NO
YES
EXECUTE
SIMULATION NO. 66-10
IMAGE MEMORY CLEAR
TEST
CLOSE
0
ARE YOU SURE?
NO
YES
EXECUTE
TO TURN THE COPIER ON, TURN THE POWER
SWITCH TO OFF THEN ON AGAIN.
SWITCH TO OFF THEN ON AGAIN.
TEL
LIN
E
Click on the first or last page to see other AR-FX10 service manuals if exist.