Read Sharp AR-FX10 Service Manual online
AR-FX10 UNPACKING AND INSTALLATION 5 - 3
(10) Turn on the main switch of the printer and the fax
power switch.
Insert the power plug of the printer to the outlet and turn on the
main power switch and the fax power switch.
main power switch and the fax power switch.
(11) Set the destination for the main unit.
• Be sure to set the destination for the main unit before set-
ting the destination for the fax.
1) Switch the operation panel to the copy mode and use the key
operation [P]
→
[
∗
]
→
[C] and [
∗
] to enter the simulation
mode.
2) Use the 10-key pad to enter [26] in the main code entry
screen and press the [START] key.
3) The sub-code list is displayed. Use the 10-key pad to enter [6]
and press the [START] key.
4) Select the desired destination from the destination list and
press the [START] key.
When you press the [CA] key, this machine will be rebooted
and will start with the setting of the selected destination for
the main unit.
and will start with the setting of the selected destination for
the main unit.
(For example, to set the U.K. as the destination, select [U.K.]
from the destination list.)
from the destination list.)
(12) Set the destination for the fax.
1) Switch the operation panel to the copy mode and use the key
operation [P]
→
[
∗
]
→
[C] and [
∗
] to enter the simulation
mode.
2) Use the 10-key pad to enter [66] in the main code entry
screen and press the [START] key.
3) Use the 10-key pad to enter [2] in the sub-code entry screen
and press the [START] key.
4) To set the U.K. as the destination, enter [10110100] using the
10-key pad and select [SET]
→
[EXECUTE], and [YES] in this
order to register it.
When you press the [CA] key, this machine will be rebooted
and will start with the setting of the selected destination.
and will start with the setting of the selected destination.
NOTE: To display the list of country codes, press the [DEST
CODE] key.
Separate table 1: Setting value of destination for fax
ON
ON
SIMULATION
INPUT A MAIN PROGRAM NUMBER BY 10-KEY PAD, AND PRESS START.
TEST
CLOSE
26
0
SIMULATION NO. 26
INPUT A SUB PROGRAM NUMBER BY 10-KEY PAD, AND PRESS START.
TEST
CLOSE
2
6
0
2:SIZE SETUP
3:AUDITOR SETUP
5:A3(11
3:AUDITOR SETUP
5:A3(11
X
17)COUNTUP
6:DESTINATION SETUP
10:NETWORK SCANNER
TRIAL MODE SETUP
35:TROUBLE MEMORY MODE SETUP
10:NETWORK SCANNER
TRIAL MODE SETUP
35:TROUBLE MEMORY MODE SETUP
38:ENGINE LIFE OVER SETTING
41:PAMPHLET MODE AMS SETTING
49:COPY SPEED MODE SETUP
50:FUNCTION SETTING
52:A BLANK PAPER COUNT MODE SETUP
53:DISABLING OF AUTOMATIC
COLOR CALIBRATION.
41:PAMPHLET MODE AMS SETTING
49:COPY SPEED MODE SETUP
50:FUNCTION SETTING
52:A BLANK PAPER COUNT MODE SETUP
53:DISABLING OF AUTOMATIC
COLOR CALIBRATION.
1/2
SIMULATION NO. 26-06
DESTINATION SETUP
TEST
CLOSE
0
U. S. A.
Canada
Inch
Japan
Aus.
U. K.
Europe
China
AB _ A
AB _ B
Destination
FAX Software SW No 1 – 8
JAPAN
0
0
0
0
0
0
0
0
U.S.A.
1
0
1
1
0
1
0
1
AUSTRALIA
0
0
0
0
1
0
0
1
NEWZEALAND
0
1
1
1
1
1
1
0
U.K.
1
0
1
1
0
1
0
0
FRANCE
0
0
1
1
1
1
0
1
GERMANY
0
0
0
0
0
1
0
0
SWEDEN
1
0
1
0
0
1
0
1
SIMULATION
INPUT A MAIN PROGRAM NUMBER BY 10-KEY PAD, AND PRESS START.
TEST
CLOSE
66
0
SIMULATION NO. 66
INPUT A SUB PROGRAM NUMBER BY 10-KEY PAD, AND PRESS START.
TEST
CLOSE
2
0
1:FAX SOFT SW. SETTING
2:FAX SOFT SW. CLEAR
(WITHOUT ADJUSTMENT VALUE)
3:FAX PWB MEMORY CHECK
4:SIGNAL OUTPUT CHECK(LEVEL MAX)
5:SIGNAL OUTPUT CHECK(SOFT SW.)
6:PASS CODE PRINT OUT
2:FAX SOFT SW. CLEAR
(WITHOUT ADJUSTMENT VALUE)
3:FAX PWB MEMORY CHECK
4:SIGNAL OUTPUT CHECK(LEVEL MAX)
5:SIGNAL OUTPUT CHECK(SOFT SW.)
6:PASS CODE PRINT OUT
7:IMAGE MEMORY PRINT OUT
8:MESSAGE OUTPUT CHECK
(LEVEL MAX)
9:MESSAGE OUTPUT CHECK(SOFT SW)
10:IMAGE MEMORY CLEAR
11:300bps SIGNAL OUTPUT
8:MESSAGE OUTPUT CHECK
(LEVEL MAX)
9:MESSAGE OUTPUT CHECK(SOFT SW)
10:IMAGE MEMORY CLEAR
11:300bps SIGNAL OUTPUT
(LEVEL MAX)
1/3
1 / 1
SIMULATION NO. 66-02
PRESENT:
NEW:
FAX SOFT SW. CLEAR
(WITHOUT ADJUSTMENT VALUE)
TEST
CLOSE
0
DEST CODE
YES
ARE YOU SURE?
NO
EXECUTE
SET
--------
10110100
1 / 1
SIMULATION NO. 66-02
PRESENT:
NEW:
FAX SOFT SW. CLEAR(WITHOUT ADJUSTMENT VALUE)
TEST
CLOSE
0
DEST CODE
YES
ARE YOU SURE?
NO
EXECUTE
SET
--------
Click on the first or last page to see other AR-FX10 service manuals if exist.