Read Sharp AR-FX10 Service Manual online
AR-FX10 SIMULATIONS, FAX SOFTWARE SWITCH 6 - 1
[6] SIMULATIONS, FAX SOFTWARE SWITCH
1. Entering the simulation mode
a. Nomal mode
Enter the copy mode and perform the following procedures.
[P]
[*]
[C]
[*]
[Main
code]
[START]
[Sub
code]
[START]
b. FAX mode
Enter the copy mode and perform the following procedures.
[9]
[*]
[8]
[#]
[7]
2. Switching the simulation mode
Press [CUSTOM SETTINGS] to return to the code entry screen.
3. Canceling the simulation mode
Press [CA] key to cancel the simulation mode.
4. Simulation list
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
22
5
Used to check the ROM version of
each unit (section).
each unit (section).
Others
Software
6
Used to print the setting and
adjustment data list.
adjustment data list.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Data
Setting/
Adjustment data
Adjustment data
11
Used to check the number of use of
FAX. (When the FAX is installed)
FAX. (When the FAX is installed)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
FAX
Counter
24
10
Used to clear the FAX counter.
(When the FAX is installed)
(When the FAX is installed)
Data clear
FAX
Counter
46
40
Collective adjustment of FAX mode
(all modes) document scan density
(When the FAX is installed)
(all modes) document scan density
(When the FAX is installed)
Adjustment
ICU PWB / FAX
Picture quality
41
Used to adjust the FAX mode
(normal mode) document scan
density (when the FAX is installed).
(normal mode) document scan
density (when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
42
Used to adjust the FAX mode (fine
text mode) document scan density
(when the FAX is installed).
text mode) document scan density
(when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
43
Used to adjust the FAX mode (super
fine mode) document scan density
(when the FAX is installed).
fine mode) document scan density
(when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
44
Used to adjust the FAX mode (ultra-
fine mode) document scan density
(when the FAX is installed).
fine mode) document scan density
(when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
49
1
Used for firmware version up
(Machine/FAX).
(Machine/FAX).
Version up
Firmware (Machine/FAX)
Operation
50
27
Used to adjust image loss in the
FAX/scanner mode.
FAX/scanner mode.
Adjustment
FAX/Scanner
Picture quality
66
01
Used to change/set the soft SW
setting (FAX-related items). (When
the FAX is installed.)
setting (FAX-related items). (When
the FAX is installed.)
Setting
FAX
02
Used to initialize the soft SW setting
(FAX-related items) according to the
destination. (When the FAX is
installed.)
(FAX-related items) according to the
destination. (When the FAX is
installed.)
Setting
FAX
Data
Initializing
03
Used to check the memory on the
Modem controller. (When the FAX is
installed.)
Modem controller. (When the FAX is
installed.)
Operation test/check
FAX
Operation
04
Used to select a signal and send it to
the line and speaker (at the max.
level). (When the FAX is installed.)
the line and speaker (at the max.
level). (When the FAX is installed.)
Operation test/check
FAX
Operation
05
Used to select a signal and send it to
the line and the speaker. (Level: Soft
SW setting) (When the FAX is
installed.)
the line and the speaker. (Level: Soft
SW setting) (When the FAX is
installed.)
Operation test/check
FAX
Operation
06
Used to print the check list of the
contents when confidential
registration is made. (When the FAX
is installed.)
contents when confidential
registration is made. (When the FAX
is installed.)
Data output/check
FAX
Data
Confidential pass
code
code
07
Used to print all the images in the
memory. (When the FAX is
installed.)
memory. (When the FAX is
installed.)
Data output/check
FAX
Data
Image data
Click on the first or last page to see other AR-FX10 service manuals if exist.