Read Sharp AR-FX10 Service Manual online
AR-FX10 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 2
2. FAX mode (Condition settings screen)
The condition settings screen of fax mode is displayed by pressing the [IMAGE SEND] key while the print mode, copy mode, or job status
screen appears in the touch panel. In the explanations that follow, it is assumed that the initial screen that appears after pressing the
[IMAGE SEND] key is the condition settings screen (shown below). If you have set the display to show the address directory screen (next
page) when the [IMAGE SEND] key is pressed, touch the [CONDITION SETTINGS] key in the address directory screen to display the con-
dition settings screen.
screen appears in the touch panel. In the explanations that follow, it is assumed that the initial screen that appears after pressing the
[IMAGE SEND] key is the condition settings screen (shown below). If you have set the display to show the address directory screen (next
page) when the [IMAGE SEND] key is pressed, touch the [CONDITION SETTINGS] key in the address directory screen to display the con-
dition settings screen.
"Default display settings" in the key operator programs can be used to select whether the condition settings screen (below) appears or the
address directory screen (next page) appears as the initial screen when the [IMAGE SEND] key is pressed.
address directory screen (next page) appears as the initial screen when the [IMAGE SEND] key is pressed.
∗
When the network scanner option is installed, you will return to the initial screen of fax mode or scanner mode, whichever mode was
selected last. (Pressing the [IMAGE SEND] key in a copy screen or printer screen returns you to the initial screen of fax mode.)
selected last. (Pressing the [IMAGE SEND] key in a copy screen or printer screen returns you to the initial screen of fax mode.)
A. Condition settings screen
The display is initially set (factory setting) to show the following condition settings screen as the initial screen.
1
Message display
Messages appear here to indicate the current status of the machine. The icon at left (
)
indicates fax mode.
2
Memory and reception mode
display
display
This shows the amount of fax memory that is free and the currently selected reception mode.
3
[SPEAKER] key
Touch the [SPEAKER] key to dial and transmit a fax manually.
During dialing it changes into the [PAUSE] key, and after touching the [SUB ADDRESS] key it
changes into the [SPACE] key.
During dialing it changes into the [PAUSE] key, and after touching the [SUB ADDRESS] key it
changes into the [SPACE] key.
4
[REDIAL] key
Touch this key to redial the number most recently dialed with the numeric keys or a one-touch key.
After dialing, this key changes into the [NEXT ADDRESS] key.
After dialing, this key changes into the [NEXT ADDRESS] key.
5
[ADDRESS DIRECTORY] key
Touch this key to display the address directory screen (next page). Touch this key when you want
to use an auto-dial number (one-touch dialing or group dialing).
to use an auto-dial number (one-touch dialing or group dialing).
6
[SUB ADDRESS] key
Touch this key to enter a sub-address and passcode when using F-code transmission.
7
[ADDRESS REVIEW] key
When performing a broadcast transmission, touch this key to check your selected destinations.
The selected destinations will appear and any unneeded destinations can be deleted.
The selected destinations will appear and any unneeded destinations can be deleted.
8
[SCANNER/FAX] key
This key appears when the network scanner option is installed. Touch the key to switch between
the scanner screen and the fax screen. When the fax screen appears, "FAX" is highlighted. When
the scanner screen appears, "SCANNER" is highlighted.
the scanner screen and the fax screen. When the fax screen appears, "FAX" is highlighted. When
the scanner screen appears, "SCANNER" is highlighted.
9
[SPECIAL MODES] key
Touch this key to set one of the following special functions:
• Timer transmission
• Polling
• Dual page scan
• Program
• Memory box
• Timer transmission
• Polling
• Dual page scan
• Program
• Memory box
10
Two-sided original icon display
Icons appear here when you touch the [ORIGINAL] key and select two-sided scanning. The icons
can be touched to open function selection screens.
can be touched to open function selection screens.
11
[ORIGINAL] key
Touch this key when you wish to manually set the size of the original to be scanned or scan both
sides of the original.
sides of the original.
12
[RESOLUTION] key
Touch this key to change the resolution setting for the original to be scanned. The selected
resolution setting will be highlighted above the key. The initial factory setting is [STANDARD].
resolution setting will be highlighted above the key. The initial factory setting is [STANDARD].
13
[EXPOSURE] key
Touch this key to change the exposure setting for the original to be scanned. The selected
exposure setting will be highlighted above the key. The initial factory setting is [AUTO].
exposure setting will be highlighted above the key. The initial factory setting is [AUTO].
14
Special function icon display
When a special function such as polling or dual page scan is selected, a special function icon
appears here.
appears here.
ADDRESS
DIRECTORY
AUTO
READY TO SEND.
ORIGINAL
STANDARD
RESOLUTION
AUTO
EXPOSURE
SUB ADDRESS
ADDRESS REVIEW
SPECIAL MODES
REDIAL
SPEAKER
FAX MEMORY:100%
AUTO RECEPTION
SCANNER
FAX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Click on the first or last page to see other AR-FX10 service manuals if exist.