AR-FX10. Service manual - Sharp Copying Equipment Service Manual (repair manual). Page 6

AR-FX10  EXTERNAL VIEWS AND INTERNAL STRUCTURES  4 - 1

1

Touch panel

• Messages and keys appear on the touch panel. Key input is accomplished by touching the keys.
• When a key in the touch panel is touched, a beep sounds and the key is highlighted.
• Keys that cannot be selected in a screen are greyed out. If touched, a double-beep will sound to

alert you that the key cannot be selected.

2

Mode select keys

Use these keys to change modes.

3

[IMAGE SEND] key

Press to switch to fax mode. The initial screen of fax mode will appear.
When the network scanner option is installed, touch this key to return to the initial screen of fax 
mode or scanner mode, whichever mode was selected last. (Pressing the [IMAGE SEND] key in a 
copy screen or printer screen returns you to the initial screen of fax mode.) To switch to the initial 
screen of fax mode from the initial screen of scanner mode, touch the [SCANNER/FAX] key.

4

Numeric keys

Use to enter fax numbers, sub-addresses, passcodes, and numerical settings.

5

[C] key (clear key)

Use to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical 
settings. One digit is cleared each time you press the key.
When an original is being scanned, this key can also be used to cancel scanning.

6

[CA] key (clear all key)

Use to cancel a transmission or programming operation. When this key is pressed, the operation is 
cancelled and you return to the initial screen described on the following page.
This key is also used to cancel a resolution, paper size, or special function setting that was 
selected when sending a fax.

7

[

∗

] key

This is used to produce tone signals when you are on a pulse dial line.

8

[BLACK COPY START] key

Press to begin scanning an original for fax transmission.

9

[COLOR COPY START] key

Not used when using the machine as a fax machine. (For information on this key.)

1

2

3

4

5

6

9

7

8