Read Sharp AR-C260 (serv.man37) FAQ online
AR-C260 FLASH UPGRADE PROCEDURE
Desk Unit Procedure
1.
Power off the copier and remove the desk unit power source cover
2.
Connect the PC and the Level Converter desk unit serial I/F connector to the
Level converter.
Level converter.
3.
Start Windows.
Within the “Windows” device manager, double click the “Communications Port” to
be used and under “Port setup”, check the communication speed is set to
384000 bits/sec.
Within the “Windows” device manager, double click the “Communications Port” to
be used and under “Port setup”, check the communication speed is set to
384000 bits/sec.
4.
Turn on the copier. Within the Copier LCD, enter Simulation 49-10
5.
Start the Maintenance program on the PC side.
6.
Select the communication speed (baud rate) on the option menu and set the speed to
384000 bits/sec.
384000 bits/sec.
Cont’d
Click on the first or last page to see other AR-C260 (serv.man37) service manuals if exist.