Read Sharp AR-C260 (serv.man37) FAQ online
AR-C260 FLASH UPGRADE PROCEDURE
Engine Procedure (Tiger)
1.
Power off the copier and remove the Tiger control PWB. Set the control
jumpers as follows:-
jumpers as follows:-
AR-Mxxx -
Set JP2 & JP5 to H
AR-Pxxx
Set JP2 & JP4 to H
ARP350/450 Version
PRN-Control PWB
Function
Jumper switching function
The mark printed on PWB
SET
Default Setting
BOOT program start
DIAG
JP4
ON
OFF
Flash write (Control-PWB)
VCCW
JP2
H/off enable
L/On
protect
ARM350/450 Version
MFP-Control PWB
Function
Jumper switching function
The mark printed on PWB SET Default setting
BOOT program start
DIAG
JP5
ON
OFF
Flash write (Control-PWB)
VCCW
JP2
H/Off
enable
L/On
protect
2.
Remove the flashcard from the AR-C260 and insert into the write socket on the Tiger
control pwb. Re-install the Control PWB back into the machine.
control pwb. Re-install the Control PWB back into the machine.
Note: The write socket on the Tiger control board is the only spare socket
Available
Available
Cont’d
JP4
JP7
JP5
JP2
JP3
JP6
JP6
JP2
JP3
JP4
JP5
Click on the first or last page to see other AR-C260 (serv.man37) service manuals if exist.