Read Sharp AR-C260 (serv.man12) Service Manual online
AR-C260/C260M SIMULATION 9 - 11
50
2
Used to adjust the copy image
position and the void area
(image loss) on print paper in
the copy mode. (Simple
method)
(The same content of SIM 50-1.
However this simulation is
easier to perform.)
position and the void area
(image loss) on print paper in
the copy mode. (Simple
method)
(The same content of SIM 50-1.
However this simulation is
easier to perform.)
Adjustment
Picture quality
Image position
5
Used to adjust the image
position and print area in the
sub scanning direction. (Print
engine section)
position and print area in the
sub scanning direction. (Print
engine section)
Adjustment
ICU/Printer
Picture quality
10
Used to adjust the print image
center position. (Adjustment is
performed in each paper feed
position separately.)
center position. (Adjustment is
performed in each paper feed
position separately.)
Adjustment
Image process (ICU)
Picture quality
Image position
12
Used to adjust the print image
center position. (The
adjustment is performed in each
document mode separately.)
center position. (The
adjustment is performed in each
document mode separately.)
Adjustment
Image process (ICU)
Picture quality
Image position
20
Used to adjust the image
registration. (Manual
adjustment)
registration. (Manual
adjustment)
Adjustment
Picture quality
Image position
22
Used to adjust the image
registration. (Automatic
adjustment)
registration. (Automatic
adjustment)
Adjustment
Picture quality
Image position
24
Used to display the adjustment
data of automatic registration.
data of automatic registration.
Adjustment
Picture quality
Image position
27
Used to adjust image loss in the
FAX/scanner mode.
FAX/scanner mode.
Adjustment
FAX/Scanner
Picture quality
51
1
Used to adjust the transfer
voltage ON timing.
voltage ON timing.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Transfer
Operation
2
Used to adjust the contact
pressure of paper on the resist
roller of each section (each
paper feed and duplex feed of
the copier).
(This adjustment is required
when the print image position
variations are considerably
great or when paper jams occur
frequently.)
pressure of paper on the resist
roller of each section (each
paper feed and duplex feed of
the copier).
(This adjustment is required
when the print image position
variations are considerably
great or when paper jams occur
frequently.)
Adjustment
Paper transport (Paper
exit, switchback,
transport)
exit, switchback,
transport)
Operation
52
1
Used to adjust the duplex print
mode stacking capacity (Used
to adjust the stop position of the
duplex unit paper tray width
alignment plate. The home
position of the width alignment
plate is changed by software.)
mode stacking capacity (Used
to adjust the stop position of the
duplex unit paper tray width
alignment plate. The home
position of the width alignment
plate is changed by software.)
Adjustment
Duplex
Operation
53
1
Used to adjust the document
stop position in each operation
mode of the RADF.
stop position in each operation
mode of the RADF.
Adjustment
RADF
Operation
2
Used to adjust the optical
sensor sensitivity in RADF.
sensor sensitivity in RADF.
Adjustment
RADF
Operation
60
1
Used to check the operation of
ICU PWB image DRAM read/
write.
ICU PWB image DRAM read/
write.
Operation test/check ICU (Memory)
Operation
61
4
Used to adjust the scanner
(writing) unit (LED array unit)
skew.
(writing) unit (LED array unit)
skew.
Adjustment
Scanner (writing)
Operation
63
1
Used to check the result of
shading correction. (The
shading correction data are
displayed.)
shading correction. (The
shading correction data are
displayed.)
Adjustment/Setting/
Operation data
output, check
(display, print)
Operation data
output, check
(display, print)
Scanner (Exposure)
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Click on the first or last page to see other AR-C260 (serv.man12) service manuals if exist.