AR-C260 (serv.man12). (9) Test Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 6

AR-C260/C260M  SIMULATION  9 - 6

26

2

1. Used to set the paper size of 

the large capacity tray. 
(When the paper size is 
changed, the software setup 
must be changed 
accordingly with this 
simulation.)

2. Used to detect 8.5 " x 13" 

(INCH Series) paper or 
documents and to set the 
display mode. (All paper 
feed modes)

3. Used to set the display form 

of the paper kind in the 
manual paper feed mode.

Setting

Paper feed

Specifications

3

Used to set the auditor 
specification mode. Setting 
must be made according to the 
use conditions of the auditor.

Setting

Auditor

Specifications

5

Used to set the count mode of 
the total counter and the 
maintenance counter.

Setting

Specifications

Counter

6

Used to set the destination 
specifications (paper, fixed copy 
magnification ratios, image 
(process) correction, machine 
operation in case of an error, 
etc.).

Setting

Specifications

Destination

10

Used to set the trial mode of the 
network scanner.

Setting

Scanner

Specifications

18

Used to set YES/NO of toner 
save operation. (This simulation 
is Enable only for Japan and UK 
versions. It depends on SIM 26-
6 (Destination) setting.
For the other destinations, the 
same setting can be made by 
the user program P22. 
(Effective only in the 
monochrome copy mode)

Setting

Specifications

Operation mode 
(Common)

35

Used to set whether the trouble 
history display by SIM 22-4 is 
displayed as one trouble or as 
the accumulated number of 
continuous troubles when two 
or more troubles of same kind 
occur continuously.

Setting

Specifications

38

Used to set "Continue/
Discontinue" of printing when 
toner life is reached.

Setting

Specifications

41

Used to set Enable/Disable of 
AMS operation in the center-
binding mode. 

Setting

Specifications

52

Used to set YES/NO of count up 
of non-copy paper (cover or 
insertion paper).

Setting

Specifications

Operation mode

53

Used by the user to set Enable/
Disable auto color calibration 
(auto adjustment of color 
balance and density)

Setting

Specifications

Operation mode

57

Used to set the model name for 
use as the status information.

Setting

Specifications

65

Used to set the finisher alarm 
mode.

Setting

Specifications

Code

Function (Purpose)

Purpose

Section

Item

Main

Sub