Read Sharp AR-C260 (serv.man12) Service Manual online
AR-C260/C260M SIMULATION 9 - 14
[When the RADF is installed]
[When RADF is installed]
(Sensors to be detected)
[When the sorter is installed]
2
-2
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operations of the sensors and
detectors in the RADF unit and the related circuits.
detectors in the RADF unit and the related circuits.
Section
RADF
Item
Operation
Operation/
Procedure
Procedure
The operations of the sensors and detectors in the
RADF are displayed.
The active sensors and detectors are highlighted.
RADF are displayed.
The active sensors and detectors are highlighted.
DSS
Empty sensor
DFD
Resist sensor
DTD
Timing sensor
DRS
Reverse sensor
DES
Paper exit sensor
AUOD
RADF open/close sensor
FGOD
Paper feed section cover open/close sensor
DEOS
Paper repulsion section cover open/close sensor
DWS1
Tray width sensor (297mm)
DWS2
Tray width sensor (11")
DWS3
Tray width sensor (257mm)
DWS4
Tray width sensor (210/8.5")
DWS5
Tray width sensor (182mm)
DLS1
Tray width sensor (240mm)
DLS2
Tray width sensor (300mm)
DWS
Document width sensor
2
-3
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operations of the loads in the RADF
unit and the control circuits.
unit and the control circuits.
Section
RADF
Item
Operation
Operation/
Procedure
Procedure
1. The names of the loads that can be operated are
displayed. Select the load to be checked with the
key, and the selected load is highlighted.
key, and the selected load is highlighted.
2. Press the [EXECUTE] key.
FM FORWORD
Paper feed motor forward rotation
DFM REVERSE
Paper feed motor reverse rotation
DTM FORWORD
Transport motor forward rotation
DTM REVERSE
Transport motor reverse rotation
DRM FORWORD
Paper expulsion motor forward rotation
DRSOL
Paper reverse solenoid
3
3
-2
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operations of the sensors and
detectors in the finisher and the related circuits.
detectors in the finisher and the related circuits.
Section
Finisher
Item
Operation
Operation/
Procedure
Procedure
The operating status of the sensors and detectors of the
finisher is displayed. The active sensor/detector display
is highlighted.
finisher is displayed. The active sensor/detector display
is highlighted.
FES
Inlet sensor
FPHPS
Paddle HP sensor
FARHPS
Bundle roller HP sensor
FFJHPS
Alignment HP sensor (F)
FRJHPS
Alignment HP sensor (R)
FAS
Alignment tray sensor
FOBHPS
Paper exit belt HP sensor
FBES
Tray paper sensor
FSLS
Paper surface sensor
FFPS
Binding position sensor
FFHPS
Binding HP sensor
FFRHPS
Binding roller HP sensor
FFES
Binding paper sensor
FFE
Binding clock sensor
FULS
Lift upper limit sensor
FLLS
Lift lower limit sensor
FLE
Lift clock sensor
FSHPS
Slide HP sensor
FSPS
Self prime sensor
FFDS
Front door sensor
FCS
Upper cover sensor
FFDSW
Front door switch
FJS
Joint switch
FSSS
Stapler safety switch
FPTS
Punch timing sensor
FPSS1
Punch side resist sensor 1
FPSS2
Punch side resist sensor 2
FPSS3
Punch side resist sensor 3
FPSS4
Punch side resist sensor 4
FPDS
Punch dust sensor
FPUC
Punch connection
FPSHPS
Punch side resist home position
FPE
Punch motor encoder
SBPED
Sensor in bin
SLDHP
Lead cam HP sensor
SGBHP
Guide bar HP sensor
SBUHP
Bin unit HP sensor
SPPD
Paper exit sensor
SJSW
Joint switch
SPSW2
Push switch 2
SPSW3
Push switch 3
SDIPSW1
DIP switch (SW1)
SDIPSW2
DIP switch (SW2)
SDIPSW3
DIP switch (SW3)
SDIPSW4
DIP switch (SW4)
SDIPSW5
DIP switch (SW5)
SDIPSW6
DIP switch (SW6)
Click on the first or last page to see other AR-C260 (serv.man12) service manuals if exist.