Read Sharp AM-400 (serv.man8) Service Manual online
AM-400DE
2 – 13
3.4.2 Life clear mode
This mode is used for clearing life counters.
(a) Life all clear
Press the [ENTER] key, and the life counters of the printer and the life
counter of the scanner are set to 0.
counter of the scanner are set to 0.
Note: The value for Top void is not cleared.
(b) Life each clear
This mode is used to respectively clear the life counter of the printer
and the counter of the scanner. Select the desired counter and press
[ENTER] key.
and the counter of the scanner. Select the desired counter and press
[ENTER] key.
Note: If “5: TONER” is executed, both “TONER PAGE” and “TONER
DOTCOUNT” are cleared.
DOTCOUNT” are cleared.
3.5. Top void adjust
This mode is used for adjusting the top margin for printing.
3.5.1 Pattern print
For the print pattern, a graduation scale is printed on the leading edge
of the paper with figures. Enter the smallest figure as a top void value.
of the paper with figures. Enter the smallest figure as a top void value.
3.5.2 Void setting
Enter a top void value.
Input range: [0 - 40]
3.6. Print adjust
This mode is used to set some values about the printer.
3.6.1 Fan MD time set
This mode is used to set the driving time of the fan motor after stop-
ping the main motor.
ping the main motor.
• Default value: 02
• Input Range: MIN: 00, MAX: 63
• Unit: Minute
After entering the value, the Printer Adjust mode ends and the next
mode is displayed.
mode is displayed.
3.6.2 Tray temp.
This mode is used to set the temperature of fixing when printing from
the standard tray.
the standard tray.
1. ON TEMP.
The temperature to start turning on the heater.
• Default value: 190
• Range: MIN: 170, MAX: 233
• Unit: Centigrade
2. OFF TEMP.
The temperature to start turning off the heater.
• Default value: 190
• Range: MIN: 170, MAX: 233
• Unit: Centigrade
3. FEED TEMP.
The temperature to start feeding the paper.
• Default value: 190
• Range: MIN: 170, MAX: 233
• Unit: Centigrade
4. TIME
Warming up time after reaching the temperature that the printing
can be done.
can be done.
• Default value: 10
• Range: MIN: 10, MAX: 63
• Unit: Second
[>]Key
1: LIFE CLEAR ALL
2: LIFE CLR EACH
2: LIFE CLEAR
[>]Key
1: SCAN(ADF)
3: PRINT
4: DRUM
5: TONER
[>]Key
[ENTER]Key
[>]Key
[>]Key
[>]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
LI FE CLE AR
LI FE CLE AR
LI FE CLE AR
LI FE CLE AR
LI FE CLE AR
(a)[ENTER]Key
(b)[ENTER]Key
[>]Key
2: SCAN(FB)
[ENTER]Key
LI FE CLE AR
TOP VOID ADJUST
[ENTER]Key
1: PATTERN PRINT
2: VOID SETTING
[>]Key
PRINT ADJUST
[ENTER]Key
FAN MD_TIME SET
TRAY TEMP.
[>]Key
[>]Key
BYPASS TEMP.
[>]Key
FLICKER ADJUST
[>]Key
PARAMETERL IST
[>] Ke y
FAN MD_TIME SET
[ENTER]Key
FAN MD_TIME( 02 )
Cursor position
TRAY TEMP.
ON temp.=190 deg
OFF temp.=190 deg
FEED temp.=190 deg
TIME=10(s)
[ENTER]Key
[>]Key
[>]Key
[>]Key
[>]Key
Input temperature using the numeric keys
Input temperature using the numeric keys
Input temperature using the numeric keys
Input temperature using the numeric keys
Click on the first or last page to see other AM-400 (serv.man8) service manuals if exist.