Read Sharp AM-400 (serv.man8) Service Manual online
AM-400DE
2 – 9
b) If any key skipped, the following message will be displayed.
A key name that is not pressed yet is displayed so that this test can
be continued.
be continued.
At that time, pressing the [STOP] key will exit this mode. And the
result will be printed.
result will be printed.
2) Black screen
2.1.4 Check pattern mode
The effective printing area frame is printed in the specified sheet size
of the standard tray (Letter/Legal/A4).
of the standard tray (Letter/Legal/A4).
1. Printing the pattern
Printing size depends on Paper Size setting in Common Setting.
2.1.5 Signal send mode 1
The specified signals are transmitted in the following sequence to
check the modem.
check the modem.
1. Press the [ENTER] key, and no signals with the loop state starts.
2. Pressing the [ENTER] key during transmitting CNG signal, or
pressing the [STOP] key will stop the output of signal and exit the
mode.
mode.
2.1.6 Signal send mode 2
The specified signals about V.34 and V.8 mode transmitted in the fol-
lowing sequence to check the modem.
lowing sequence to check the modem.
1. Press the [ENTER] key, and no signals with the loop state starts.
2. Pressing the [ENTER] key during transmitting ANSam signal, or
pressing the [STOP] key will stop the output of signal and exit the
mode.
mode.
2.1.7 Memory clear
Clear the backup memory including the soft switches, registration
data. After executing this mode, the memory clear report is printed.
data. After executing this mode, the memory clear report is printed.
Note: The following data is not cleared. Values for Printer life including
the adjusted value of printing void.
the adjusted value of printing void.
2.1.8 CIS adjusting mode
When the "color scan" or "monochrome scan" is selected in this mode,
the scanner motor moves from its home position to the specified value.
Then, the document reading lamp is turned on.
the scanner motor moves from its home position to the specified value.
Then, the document reading lamp is turned on.
1. Press the [STOP] key to exit the mode.
[ 1]
No signals (making the loop)
[ 9]
9600bps (V.29)
[ 2]
4800bps (V.27ter)
[10]
7200bps (V.29)
[ 3]
14400bps (V.33)
[11]
4800bps (V.27ter)
[ 4]
12000bps (V.33)
[12]
2400bps (V.27ter)
[ 5]
14400bps (V.17)
[13]
300Hz (FLAG)
[ 6]
12000bps (V.17)
[14]
2100Hz (CED)
[ 7]
9600bps (V.17)
[15]
1100Hz (CNG)
[ 8]
7200bps (V.17)
KEY ERROR !!
CHECKP ATTERN
NOW AGING
[ENTER]Key
SIGNAL SEND1
CML ON
[ENTER]Key
V.27ter
4800bps
V.17
14400bps
V.33
12000bps
[ENTER]Key
V.33
14400bps
V.17
12000bps
V.17
9600bps
[ENTER]Key
V.17
7200bps
V.27ter
4800bps
V.29
7200bps
[ENTER]Key
V.29
9600bps
V.27ter
2400bps
FLAG (300bps)
[ENTER]Key
2100 Hz (CED TONE)
1100 Hz (CNG)
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ 1]
No signals (making the loop)
[ 9]
16800bps (V.34)
[ 2]
33600bps (V.34bis)
[10]
14400bps (V.34)
[ 3]
31200bps (V.34bis)
[11]
12000bps (V.34)
[ 4]
28800bps (V.34)
[12]
9600bps (V.34)
[ 5]
26400bps (V.34)
[13]
7200bps (V.34)
[ 6]
24000bps (V.34)
[14]
4800bps (V.34)
[ 7]
21600bps (V.34)
[15]
2400bps (V.34)
[ 8]
19200bps (V.34)
[16]
0-300bps (V. 21)
[17]
ANSam
SIGNAL SEND2
CML ON
[ENTER]Key
V.34
33600bps
V.34
26400bps
V.34
28800bps
[ENTER]Key
V.34
31200bps
V.34
24000bps
V.34
21600bps
[ENTER]Key
V.34
19200bps
V.34
12000bps
V.34
14400bps
[ENTER]Key
V.34
16800bps
V.34
9600bps
V.34
7200bps
[ENTER]Key
V.34
4800bps
V.34
2400bps
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
[ENTER]Key
ANSam
V.21
0 - 300bps
[ENTER]Key
[ENTER]Key
CIS ADJUST
[ENTER]Key
The motor will move to the specified position and the reading lamp is lit on.
1: COLOR
1 key
2: MONO
2 key
Click on the first or last page to see other AM-400 (serv.man8) service manuals if exist.