Read Sharp ORDERMAN (serv.man7) User Guide / Operation Manual online
ORDERSOLUTION
User Manual
- 15 -
Show Open Tables:
If set, the open tables will be displayed within the application.
Please note: if less than 20 tables are available due to table plan this is always used.
Collect Orders:
Set ON to collect orders of the same article (change multiplier
only), otherwise every ordered article will be shown in its own
order line with multiplier=1. In this mode the multiplier can still
be used (if multiplier is changed no new line will be created).
Undo Function:
If set, the undo function is available. Please note that this
function causes additional time overhead because a backup is
created during every operation.
No Auto Price:
Price input is not automatically forced, if level 1 means standard price = 0.
If it is disabled, the user will be asked to enter a price when no standard price is set for the
article.
Fractal Price input:
Enable the input of comma for article prices during the order.
Void (off=correct):
If set, the cancellation of articles is done by using the void
command, otherwise the correct command will be used.
Deny price input:
Set OFF to allow price input for ordered articles.
No Auto Person:
If set, the person information will not be transmitted. Otherwise,
during an order every new detected seat will cause a transmission
of the number of persons. Every transmission will be added up within the ECR, so this will
only work with all orders done on the hand-held device. Please note that this must be allowed
by the ECR, otherwise an error will occur during ordering.
No Tip to Media:
If set, an input tip during the bill will not be added automatically to the media amount.
Void Enabled:
Void function may be turned off for certain ORDERMAN
If set, the open tables will be displayed within the application.
Please note: if less than 20 tables are available due to table plan this is always used.
Collect Orders:
Set ON to collect orders of the same article (change multiplier
only), otherwise every ordered article will be shown in its own
order line with multiplier=1. In this mode the multiplier can still
be used (if multiplier is changed no new line will be created).
Undo Function:
If set, the undo function is available. Please note that this
function causes additional time overhead because a backup is
created during every operation.
No Auto Price:
Price input is not automatically forced, if level 1 means standard price = 0.
If it is disabled, the user will be asked to enter a price when no standard price is set for the
article.
Fractal Price input:
Enable the input of comma for article prices during the order.
Void (off=correct):
If set, the cancellation of articles is done by using the void
command, otherwise the correct command will be used.
Deny price input:
Set OFF to allow price input for ordered articles.
No Auto Person:
If set, the person information will not be transmitted. Otherwise,
during an order every new detected seat will cause a transmission
of the number of persons. Every transmission will be added up within the ECR, so this will
only work with all orders done on the hand-held device. Please note that this must be allowed
by the ECR, otherwise an error will occur during ordering.
No Tip to Media:
If set, an input tip during the bill will not be added automatically to the media amount.
Void Enabled:
Void function may be turned off for certain ORDERMAN
®
hand-held (must be supported by the host.)
Show Seat Info:
Set ON to display seat info in order list.
Show Modifier Info:
Set ON to display modifier info in order list.
Show Seat Info:
Set ON to display seat info in order list.
Show Modifier Info:
Set ON to display modifier info in order list.
Click on the first or last page to see other ORDERMAN (serv.man7) service manuals if exist.