Read Sharp ORDERMAN (serv.man7) User Guide / Operation Manual online
ORDERSOLUTION
User Manual
- 11 -
3.4 Main Menu
The Main Menu can be disabled by setting Flag 19 of the System Flags. This feature has to be
supported by the POS. If set, the hand-held automatically calls the Select Table view after
power on.
3.4.1
Start Application
Start the ORDERSOLUTION.
3.4.2
DEMO
Start the DEMO Mode, which mimics the ORDERSOLUTION. The
true application runs, but orders are not sent to the ECR. Working
without being connected to the ECR is possible.
true application runs, but orders are not sent to the ECR. Working
without being connected to the ECR is possible.
3.5 SETUP
Configuration
The Configuration Menu allows changing the set-up during run
time. Enter the Configuration Menu.
System Menu
The System Menu contains settings required for the system
installation.
Menu Card
Configure the MenuCard.
User Flags
The user flags contain the configuration for this device (e.g. Table Setup).
Page 2
Opens the second part of the configuration.
FileInfo
The FileInfo contains information about the amount of
downloaded items.
Connect OM-Belt:
This entry starts the Easy to Install procedure. See Easy To Install
The user flags contain the configuration for this device (e.g. Table Setup).
Page 2
Opens the second part of the configuration.
FileInfo
The FileInfo contains information about the amount of
downloaded items.
Connect OM-Belt:
This entry starts the Easy to Install procedure. See Easy To Install
The DEMO Mode can be used to introduce your staff or a new employee into
working with the ORDERSOLUTION. Articles ordered in DEMO Mode are not
sent to the ECR. The articles are saved temporarily in the hand-held. If you re-enter
the ORDERSOLUTION, all items ordered in the DEMO Mode are cleared.
working with the ORDERSOLUTION. Articles ordered in DEMO Mode are not
sent to the ECR. The articles are saved temporarily in the hand-held. If you re-enter
the ORDERSOLUTION, all items ordered in the DEMO Mode are cleared.
Information
Click on the first or last page to see other ORDERMAN (serv.man7) service manuals if exist.