Read Sharp ORDERMAN (serv.man7) User Guide / Operation Manual online
ORDERSOLUTION
User Manual
- 13 -
BillPrinter Selection
Here the printer can be set, that is displayed by default in the bill menu. The printer can still
be changed in the bill view.
Finished
Return to the Main Menu.
Here the printer can be set, that is displayed by default in the bill menu. The printer can still
be changed in the bill view.
Finished
Return to the Main Menu.
3.5.2
Menu Card
Here you can configure your MenuCard.
With Default you use the downloaded MenuCard that is defined
for the whole system.
By selecting User 1 and User 2 you can change the configuration
of the default MenuCard. This means that the location of the
buttons stays the same but you can change the functionality.
Select the MenuCard you want to use by touching the radio
buttons:
Defaul:
With Default you use the downloaded MenuCard that is defined
for the whole system.
By selecting User 1 and User 2 you can change the configuration
of the default MenuCard. This means that the location of the
buttons stays the same but you can change the functionality.
Select the MenuCard you want to use by touching the radio
buttons:
Defaul:
downloaded MenuCard defined by OSC
User 1:
User MenuCard 1
User 2:
User MenuCard 2
Reset:
Initialise User MenuCard. In this case the User
MenuCard will be set to the default state
(MenuCard defined by OSC). This should be
done prior to setting up a User MenuCard.
Pressing User 1 or User 2 will enter the MenuCard Setup Mode.
Press the selected MenuCard Button which you want to
reprogramme.
Press the selected MenuCard Button which you want to
reprogramme.
The information of the button will be shown; now you can select a
different button by pressing the MenuCard, Quit the operation or
change the shown button by pressing the Change button.
different button by pressing the MenuCard, Quit the operation or
change the shown button by pressing the Change button.
Click on the first or last page to see other ORDERMAN (serv.man7) service manuals if exist.