Read Sharp DV-RW250H (serv.man9) User Guide / Operation Manual online
47
ZERO RETURN function
This function makes tape
rewinding (or forwarding) stop at
the counter “00:00:00” position
automatically.
rewinding (or forwarding) stop at
the counter “00:00:00” position
automatically.
NOTES for Counter Display:
• If you rewind the tape beyond
• If you rewind the tape beyond
“00:00:00”, a minus sign (“–”) will
be displayed in front of the time.
be displayed in front of the time.
• When you load a tape, the counter
will reset to “00:00:00”.
• The counter does not function on
nonrecorded (blank) sections of
the tape. When you rewind, fast
forward or play tapes through
blank sections, the counter stops.
the tape. When you rewind, fast
forward or play tapes through
blank sections, the counter stops.
NOTES for Video index search
system:
• When you record an INDEX mark
system:
• When you record an INDEX mark
at the very beginning of the tape,
the mark may not be found.
the mark may not be found.
• During INDEX search, the tape
may stop and begin to play at a
slightly different location.
slightly different location.
• INDEX may not function properly
with old or worn out video tapes.
• INDEX marks may not be found if
it is extremely close to the point
where the search began.
where the search began.
temporarily, the INDEX mark is not
recorded on the tape.
recorded on the tape.
8 : 47 MON
00 : 04 : 38 SP
8 : 47 MON
00 : 00 : 00 SP
CH 1
INDEX
or is displayed
+3
INDEX NO. (up to 9)
1
2
3
Switching the display between clock and counter
Press CLOCK/COUNTER. The clock
and tape counter alternate with each
other in the display.
and tape counter alternate with each
other in the display.
This function enables you to locate the beginning of any record-
ing made on the VCR.
ing made on the VCR.
Recording an INDEX MARK
The Index search function automatically records
an INDEX mark on the tape whenever a record-
ing is initiated.
an INDEX mark on the tape whenever a record-
ing is initiated.
Index search
Press INDEX or during stop or play
mode.
For Succeeding programs: Press INDEX .
For Preceding programs: Press INDEX .
(Additional press increases the INDEX NO.
up to 9.)
When the INDEX or is pressed, the
unit starts searching the INDEX NO. selected
and finds the portion, then playback starts
automatically.
To stop the Index Search, press STOP.
mode.
For Succeeding programs: Press INDEX .
For Preceding programs: Press INDEX .
(Additional press increases the INDEX NO.
up to 9.)
When the INDEX or is pressed, the
unit starts searching the INDEX NO. selected
and finds the portion, then playback starts
automatically.
To stop the Index Search, press STOP.
2D50901A P44-57
7/20/04, 12:24 PM
47