DV-RW250H (serv.man9). Tape playback - Sharp DVD User Guide / Operation Manual. Page 3

NOTES:
• The audio output is muted during SPEED SEARCH,

STILL, FRAME ADVANCE and SLOW MOTION.

• During picture search mode there will be noise bars

which are caused by the system.

• The Special Playback will automatically change to

playback after approx. 5 minutes to protect the video
tape against excessive wear.

The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning and
the playback will be repeated.

1

Press REPEAT.

2

By pressing REPEAT
each time, “REPEAT
ON” or “REPEAT OFF”
is selected in turn.

3

When “REPEAT ON” is selected, the tape is played
back to the end, and then, it is automatically re-
wound to the starting point and played back again.
To cancel repeat playback: Press REPEAT to se-
lect “REPEAT OFF”.

Press CM SKIP during playback.
The video is rapidly forwarded for approx. 30 seconds
and playback resumes.
You may press the button up to six times in a row to
move 180 seconds ahead.

Press DISPLAY. The clock, day of the week and more
information will be indicated.

To cancel the display: Press DISPLAY again.

REPEAT ON

CH  29

8 : 47  MON

00 : 00 : 00  SP

NICAM ST

8 : 30

  

   MON

00 : 15 : 12  SP

L CH

HI-FI

Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRK (TRACKING) + or – to reduce the
noise bars.
If the still picture jitters excessively, press TRK
(TRACKING) + or – to stabilise the still picture.

Press PAUSE/STILL during playback.
Press SLOW one by one: The picture advances frame
by frame.
To return to playback: Press PLAY or PAUSE/STILL.

Automatic tracking adjustment
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyses the signal to enable optimum picture quality
during playback.

Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press TRK (TRACKING) + / 

 or TRK

 to eliminate the noises. “MANUAL

TR.” will appear. Press it briefly for a fine adjustment,
or press and hold for more severe adjustments.

To return to automatic tracking, press ATR.
“AUTO TR.” will appear.

During playback press SLOW.
You can change the slow speed by the additional
pressing of SLOW.
To return to playback: Press PLAY.

Reverse picture search function
Press REW x 1 or x 2 during the playback.

Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.

Press PAUSE/STILL during playback.
To resume normal playback: Press PLAY.

  2D50901A P44-57

7/20/04, 12:24 PM

46