DV-RW250H (serv.man9). Tape playback - Sharp DVD User Guide / Operation Manual

dv-rw250h (serv.man9) user guide / operation manual
Model
DV-RW250H (serv.man9)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
158.55 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
DVD / Tape playback
File
dv-rw250h-sm9.pdf
Date

Read Sharp DV-RW250H (serv.man9) User Guide / Operation Manual online

44
Tape speed and maximum recording time
Loading and unloading a cassette tape
Use only video cassette tapes marked 
.
Erase prevention tab
Erase prevention tab
Screwdriver
Loading
Push the centre of the tape until it is automatically in-
serted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Automatic power ON
When you insert a cassette tape the VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
You can eject the video tape while the unit is turned off.
1
Press 
 (EJECT) on the unit or the remote con-
trol.
2
Remove the cassette tape.
Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewound to its
beginning, the cassette tape will be ejected automatically.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Adhesive
Tape
To record again
Cover the hole with a piece of adhesive tape.
Video cassette tape
E-30
30 min.
1 hour
E-60
1 hour
2 hours
Standard Play (SP)
Long Play (LP)
E-90
1 1/2 hou.
3 hours
E-240
4 hours
8 hours
E-180
3 hours
6 hours
Tape speed
  2D50901A P44-57
7/20/04, 12:24 PM
44
45
Cassette tape playback
NOTES:
• This VCR selects the playback
tape speed SP or LP automatically.
• A cassette tape and DVD disc can
be played back simultaneously. If
you press DVD/VCR, the tape
playback and DVD playback alter-
nate with each other on the screen.
Preparation:
• Turn ON the TV and select its AV channel (this may be labelled EXT
/ AUX etc.)
• Press DVD/VCR to select the VCR mode. (The VCR indicator will
light.)
1
Load a prerecorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start automatically).
2
To start playback
Press PLAY.
Playback will start.
If the cassette has not loaded yet,
 will blink for approx. 4 seconds.
To stop playback
Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
To rewind the tape or forward it
rapidly
Press STOP.
To rewind the tape:
Press REW.
To stop the tape winding, press STOP. To switch to playback directly
(without STOP), press PLAY.
Forward/Reverse picture search mode
When the tape is being wound, you can switch to picture search mode
(see next page). To do this, press REW or F.FWD and hold it down.
The unit will resume the tape winding as soon as the button is re-
leased.
To forward the tape:
Press F.FWD.
NTSC video cassette playback
When using a pre-recorded NTSC video cassette tape, the connected
TV set must be compatible with a 60Hz vertical frequency (sometimes
known as a PAL 60Hz feature). Otherwise the on-screen picture will be
affected by vertical rolling. Even if your VCR set is capable of processing
NTSC video signals, the picture may be shortened vertically (appear-
ance of black bars at the top and at the bottom of the TV screen). The
dubbing of a NTSC video cassette tape to a standard PAL VCR is not
possible.
  2D50901A P44-57
7/20/04, 12:24 PM
45
46
Special playback
NOTES:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
playback after approx. 5 minutes to protect the video
tape against excessive wear.
Repeat playback
The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning and
the playback will be repeated.
1
Press REPEAT.
2
By pressing REPEAT
each time, “REPEAT
ON” or “REPEAT OFF”
is selected in turn.
3
When “REPEAT ON” is selected, the tape is played
back to the end, and then, it is automatically re-
wound to the starting point and played back again.
To cancel repeat playback: Press REPEAT to se-
lect “REPEAT OFF”.
Commercial skip
Press CM SKIP during playback.
The video is rapidly forwarded for approx. 30 seconds
and playback resumes.
You may press the button up to six times in a row to
move 180 seconds ahead.
To display VCR operation status
Press DISPLAY. The clock, day of the week and more
information will be indicated.
While watching TV
While operating a tape
To cancel the display: Press DISPLAY again.
REPEAT ON
CH  29
8 : 47  MON
00 : 00 : 00  SP
NICAM ST
DAY OF THE WEEK
CHANNEL
TAPE SPEED
REAL TIME COUNTER
CLOCK
STEREO
(displayed
only for
approx. 4
seconds)
8 : 30
  
   MON
00 : 15 : 12  SP
L CH
HI-FI
OPERATING
MODE
TAPE IN
AUTO
REPEAT
HI-FI
 STEREO
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRK (TRACKING) + or  to reduce the
noise bars.
If the still picture jitters excessively, press TRK
(TRACKING) +
 or  to stabilise the still picture.
Frame by Frame picture
Press PAUSE/STILL during playback.
Press SLOW one by one: The picture advances frame
by frame.
To return to playback: Press PLAY or PAUSE/STILL.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyses the signal to enable optimum picture quality
during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press TRK (TRACKING) + / 
 or TRK
(TRACKING) – / 
 to eliminate the noises. “MANUAL
TR.” will appear. Press it briefly for a fine adjustment,
or press and hold for more severe adjustments.
To return to automatic tracking, press ATR.
“AUTO TR.” will appear.
Slow motion
During playback press SLOW.
You can change the slow speed by the additional
pressing of SLOW.
To return to playback: Press PLAY.
Picture search
Reverse picture search function
Press REW x 1 or x 2 during the playback.
Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.
Still picture
Press PAUSE/STILL during playback.
To resume normal playback: Press PLAY.
Indication for
the selected
playback
sound
(e.g.: L CH =
Left Chan-
nel) (dis-
played only
for approx. 4
seconds.)
  2D50901A P44-57
7/20/04, 12:24 PM
46
47
ZERO RETURN function
This function makes tape
rewinding (or forwarding) stop at
the counter “00:00:00” position
automatically.
NOTES for Counter Display:
• If you rewind the tape beyond
“00:00:00”, a minus sign (“–”) will
be displayed in front of the time.
• When you load a tape, the counter
will reset to “00:00:00”.
• The counter does not function on
nonrecorded (blank) sections of
the tape. When you rewind, fast
forward or play tapes through
blank sections, the counter stops.
NOTES for Video index search
system:
• When you record an INDEX mark
at the very beginning of the tape,
the mark may not be found.
• During INDEX search, the tape
may stop and begin to play at a
slightly different location.
• INDEX may not function properly
with old or worn out video tapes.
• INDEX marks may not be found if
it is extremely close to the point
where the search began.
temporarily, the INDEX mark is not
recorded on the tape.
8 : 47 MON
00 : 04 : 38 SP
8 : 47 MON
00 : 00 : 00 SP
CH  1
INDEX
or       is displayed
+3
INDEX NO. (up to 9)
1
2
3
Switching the display between clock and counter
Press  CLOCK/COUNTER. The clock
and tape counter alternate with each
other in the display.
This function enables you to locate the beginning of any record-
ing made on the VCR.
Recording an INDEX MARK
The Index search function automatically records
an INDEX mark on the tape whenever a record-
ing is initiated.
Index search
Press INDEX      or      during stop or play
mode.
For Succeeding programs: Press INDEX        .
For Preceding programs: Press INDEX      .
(Additional press increases the INDEX NO.
up to 9.)
When the INDEX       or      is pressed, the
unit starts searching the INDEX NO. selected
and finds the portion, then playback starts
automatically.
To stop the Index Search, press STOP.
  2D50901A P44-57
7/20/04, 12:24 PM
47
Page of 4
Display

Download Sharp DV-RW250H (serv.man9) User Guide / Operation Manual

Here you can read online and download Sharp DV-RW250H (serv.man9) User Guide / Operation Manual in PDF. DV-RW250H (serv.man9) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp DV-RW250H (serv.man9) DVD. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.