DV-RW250H (serv.man23). Lip sync problems on VCR to DVD dubbing - Sharp DVD Technical Bulletin (repair manual)

dv-rw250h (serv.man23) technical bulletin
Model
DV-RW250H (serv.man23)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
42.45 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
DVD / Lip sync problems on VCR to DVD dubbing
File
dv-rw250h-sm23.pdf
Date

Read Sharp DV-RW250H (serv.man23) Technical Bulletin online

DVD 2005 03 05
Date of Issue:            9
th
 March 2005
        
Classification:
White
DVD TECHNICAL BULLETIN
Page 1 of 1
Sharp Electronics (UK) Limited
Reference - JR 09 03 2005 - 2
Revision  - 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
 Red – Carry out on all units
MODEL
DVRW250H
SYMPTOM When dubbing from VCR to DVD, the lip sync may deteriorate after a few hours when
playing back the recording.
CAUSE
Software
ACTION
Reprogram the firmware to the latest version as below:
1.  Copy the firmware upgrade file off the Sharp Technical Web (VADDISV.IMG) onto
your PC's hard drive.  It is important that this file name is not changed, and that the
file name is in upper case, otherwise the update will not work
2.  Copy this file to the root directory of a blank CD-R.  Finalise the disc once copied.
3.  Turn on the DVRW250H.
4.  Connect the DVRW250H to a suitable monitor via the SCART connector.
5.  Press and hold the 2 button on the remote control and at the same time hold down
the STOP key on the DVRW250H for two seconds.
6.  The CD draw will open.
7.  Place the CD-R onto the draw and close the tray.
8.  The  monitor  display  will  indicate  'SDRAM  writing'  in  the  top  left  hand  corner  after
the disc is read.
9.  The  tray  will  open  automatically  and  the  monitor  display  will  change  to  'FLASH
writing' after thirty seconds.
10. After  two  minutes  and  thirty  seconds  (approximately),  the  monitor  display  will
change to 'Please reboot'.
11. Unplug the AC supply from the DVRW250H.
12. Wait a few seconds and then plug the AC supply back in.
13. Reset to factory defaults by pressing and holding the CH UP and the PLAY buttons
on the DVRW250H for two seconds.
14. 
Check  that  the  software  has  updated  by  pressing  and  holding  the  DVD/VCR
SELECT and CH DOWN buttons on the DVRW250H for two seconds.
            Original Software Version
New Software Version
Display

Download Sharp DV-RW250H (serv.man23) Technical Bulletin

Here you can read online and download Sharp DV-RW250H (serv.man23) Technical Bulletin in PDF. DV-RW250H (serv.man23) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp DV-RW250H (serv.man23) DVD. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.