Read Sharp CD-RW5000 (serv.man3) User Guide / Operation Manual online
CD-RW5000H/CD-RW5000W
– 14 –
Recording to a CD-R or a CD-RW
1
Press the CD button and load the desired CD(s).
2
Load the CD-R or CD-RW disc.
3
Press the REC MODE button and select the desired CD using the jog dial.
Within 10 seconds, press the ENTER button.
to the next step automatically
.
4
Press the CD
CDR button.
5
Select “AUTO” using the jog dial to finalise the disc. Then press the
ENTER button.
6
Select “HIGH” using the jog dial to record at high speed. Then press the
■
If trouble occurs (reset)
ity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Press the ON/STAND-BY button to enter the power stand-by mode.
2. Whilst pressing down the VOLUME
button, press the ON/STAND-BY button until “ALL CLEAR”
appears.
■
Maintenance
●
Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a
cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
●
When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.
●
After long use, the deck’s heads and capstans may become magnetised, causing poor sound.
head demagnetiser. Read the demagnetiser’s instructions carefully before use.
●
Clean the dust or stain on the CD or CD-R pickup lens using a commercial cleaning disc (brush type).
A
Erase head
C
Capstan
B
Recording/Playback head
D
Pinch roller
A
B
C
D
C
D
Cleaning disc (Brush type)
