Read Sharp CD-RW5000 (serv.man20) Service Manual online
– 31 –
CD-RW5000H/CD-RW5000W
1 %
FM 87.5 MHz
FM 87.5 MHz
2
FM 108.0 MHz
FM 108.0 MHz
3
FM
FM 90.0 MHz
FM 90.0 MHz
4
FM 106.0 MHz
FM 106.0 MHz
5
FM 98.0 MHz
FM 98.0 MHz
6 %
AM 522 kHz
AM 531 kHz
7
AM 1620 kHz
AM 1602 kHz
8
AM
AM 603 kHz
AM 603 kHz
9
AM 1404 kHz
AM 1404 kHz
10
AM 990 kHz
AM 990 kHz
11-40
Table 24. TEST-TuSet preset frequencies
Unused channels are indicated with "––".
"%" indicates the last channel for each band.
All FM bands are preset to FM monaural.
"%" indicates the last channel for each band.
All FM bands are preset to FM monaural.
BAND
CD-RW5000H
CH
Pickup mechanism error
E-CD01
Slide motor operation error (PU-IN SW detection NG)
Tray error
E-CD20
Tray open/close operation error
Changer mechanism error
E-CD10
Changer mechanism operation error
CD error messages
Errors
Messages
Remarks
Relation to RDS
WEAK SIG
When switching to an EON station,
EON reception impossible
it cannot be received due to weak signal
.
PLL UN LOCK
Frequency
Reception error or PLL control error
indicator
flashing
flashing
TUNER error messages
Errors
Messages
Remarks
You tried to record on a tape
'PROTECTED'
TAPE mechanism error
E-TA01
Mechanism initialize abnormal end
TAPE error messages
Errors
Messages
Remarks
ERROR MESSAGE LIST
CD-RW5000W
There are no tracks on the disc.
'NO TRACKS'
'CAN' T COPY'
'CAN' T REC'
'DISC ERROR'
'DISC FULL'
There is no space for the name information memory.
'MEMORY FULL'
***% of the name information memory is being used.
'MEMORY ***%'
There is nothing in the name information memory.
'MEMORY EMPTY'
When you tried to erase the
memory.
memory.
It is decided that there is no disc.
'CD-R NO DISC'
A track other than audio is played back.
'NOT AUDIO'
Displayed when playback sound
is not output.
is not output.
You tried to record on or edit a finalized disc.
FINALIZED CD
Pick calibration error
'OPC ERROR'
It is detected that it is a disc other than audio CD-R.
'? DISC'
Errors
Remarks
Messages
CD-R error messages
Display
