Read Sharp CD-RW5000 (serv.man3) User Guide / Operation Manual online
– 13 –
CD-RW5000H/CD-RW5000W
Listening to the Radio
1
Press the TUNER (BAND) button to select the desired frequency band (FM
or AM).
2
Press the TUNING (
or
) button to tune into the desired station.
●
When the TUNING button is pressed for more than 0.5 seconds, scanning will start auto-
matically and the tuner will stop at the first receivable broadcast station.
3
To receive an FM stereo transmission, press the ST-MODE button on the
remote control. The “ST” indicator lights up.
●
“
” will appear when an FM broadcast is in stereo.
■
Recordable discs
For recording, use audio discs only
.
This player is compatible with CD-R discs, CD-RW discs, and audio CDs with either mark below
.
Note:
CD-R/CD-RW discs intended for use with PC equipment are not compatible with this unit.
■
Differences between the CD-R disc and the CD-RW disc
What is CD-R or CD-RW?
Playback
Erasing
CD-R
Can be played on a standard CD player
when it is finalised after recording.
Erasing is impossible.
CD-RW
Cannot be played on a standard CD
player.
If it is finalised after recording, it can be
played only on a CD-RW compatible
player.
Recorded tracks can be deleted.
A finalised disc can be restored.
CD-R:
Compact Disc-Recordable
CD-RW:
Compact Disc-ReWritable
■
Finalising process
To enable CD-R/CD-RW discs to be recorded over several sessions, the current disc contents are stored
in the unit’s internal memory and only when the disc is finalised are they copied onto the disc. Until the
finalising process is complete, CD-R discs can not be played on a standard CD player. CD-RW discs can
not be played on a standard CD player even when finalised. CD-RW discs can only be played on CD-RW
compatible players.
There is a limit to the number of available recording sessions on an unfinalised disc, every time the disc
is initialised a new session is created. Do not unnecessarily turn the unit power off and on or remove and
insert the disc as this will counted as a recording session. Only insert an unfinalised disc when you intend
to make a recording.
If you initialise a CD-R disc more than 96 times, “FINALIZE CD” will appear for 1 second.
Finalise the disc as soon as possible.
When using CD-R discs, the finalising process is irreversible and no more recordings are possible even if
the disc is not full. CD-RW discs can be unfinalised and further recording/editing functions can be per-
formed.
Click on the first or last page to see other CD-RW5000 (serv.man3) service manuals if exist.