Read JBL SUB 250P (serv.man2) EMC - CB Certificate online
Page 57 of 57
Report No.: 11034065 001
IEC 60065 ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
(peak) a.c. or d.c. under normal operating
conditions, is of flammability category V-1 or
better according to AS/NZS 60695.11.10, or
the PRINTED BOARDS are protected by an
enclosure meeting the flammability category
V-0 according to AS/NZS 60695.11.10, or
made of metal, having openings only for
connecting wires which fill the openings
completely; or
conditions, is of flammability category V-1 or
better according to AS/NZS 60695.11.10, or
the PRINTED BOARDS are protected by an
enclosure meeting the flammability category
V-0 according to AS/NZS 60695.11.10, or
made of metal, having openings only for
connecting wires which fill the openings
completely; or
- base material of PRINTED BOARDS, on
which the available power at a connection
exceeds 15 VA operating at a voltage
exceeding 400 V (peak) a.c. or d.c. under
normal operating conditions, and base
material of PRINTED BOARDS supporting
spark gaps which provides protection against
overvoltages, is of flammability category V-0
according to AS/NZS 60695.11 .10 or the
PRINTED BOARDS are contained in a metal
enclosure, having openings only for
connecting wires which fill the openings
completely.
exceeds 15 VA operating at a voltage
exceeding 400 V (peak) a.c. or d.c. under
normal operating conditions, and base
material of PRINTED BOARDS supporting
spark gaps which provides protection against
overvoltages, is of flammability category V-0
according to AS/NZS 60695.11 .10 or the
PRINTED BOARDS are contained in a metal
enclosure, having openings only for
connecting wires which fill the openings
completely.
Compliance shall be determined using the
smallest thickness of the material.
smallest thickness of the material.
NOTE- Available power is the maximum power
which can be drawn from the supplying circuit
through a resistive load whose value is chosen to
maximize the power for more than 2 min when
the circuit supplied is disconnected.
which can be drawn from the supplying circuit
through a resistive load whose value is chosen to
maximize the power for more than 2 min when
the circuit supplied is disconnected.
20.201.3 For open circuit voltages greater
than 4 kV
than 4 kV
POTENTIAL IGNITION SOURCES with open
circuit voltages exceeding 4 kV (peak) a.c. or d.c.
under normal operating conditions shall be
contained in a FIRE ENCLOSURE which shall
comply with flammability category V-1 or better
according to AS/NZS 60695.11.10.
circuit voltages exceeding 4 kV (peak) a.c. or d.c.
under normal operating conditions shall be
contained in a FIRE ENCLOSURE which shall
comply with flammability category V-1 or better
according to AS/NZS 60695.11.10.