Read JBL SB 200 (serv.man3) EMC - CB Certificate online
Page 63 of 70
Report No.: 350-120155AX
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
National Differences – Japan, J60065 (H23)
7.1.5
Add the following paragraph as 2
nd
paragraph of
Condition “d “in Table 3.
For materials which are not listed in Table 3,
temperature rises in the normal operating
conditions are considered satisfactory if these
materials comply with item 3 of detailed
regulations, 1.(1),b, Appendix 4 in the Ministerial
Ordinance on stipulating technical requirements for
the Electrical Appliance and Material. Permissible
temperature rise of “Supply cords and wiring
insulation” is applicable only to the materials used
in supply cords complying with JIS C 3662
(corresponding to IEC 60227) or JIS C 3663
(corresponding to IEC 60245). Materials used in
other wiring shall comply with item 3 of detailed
regulations, 1.(1).b, Appendix 4 in the Ministerial
Ordinance on stipulating technical requirements for
the Electrical Appliance and Material.
For materials which are not listed in Table 3,
temperature rises in the normal operating
conditions are considered satisfactory if these
materials comply with item 3 of detailed
regulations, 1.(1),b, Appendix 4 in the Ministerial
Ordinance on stipulating technical requirements for
the Electrical Appliance and Material. Permissible
temperature rise of “Supply cords and wiring
insulation” is applicable only to the materials used
in supply cords complying with JIS C 3662
(corresponding to IEC 60227) or JIS C 3663
(corresponding to IEC 60245). Materials used in
other wiring shall comply with item 3 of detailed
regulations, 1.(1).b, Appendix 4 in the Ministerial
Ordinance on stipulating technical requirements for
the Electrical Appliance and Material.
Pass
7.1.5
In the first paragraph of Condition “f” of Table 3,
add ”JIS K 7206:1999 or” before the reference,
ISO 306.
add ”JIS K 7206:1999 or” before the reference,
ISO 306.
Pass
7.1.5
In Condition “f,” 1) of Table 3, add ”JIS K
7206:1999 or” before the reference, ISO 306.
7206:1999 or” before the reference, ISO 306.
Pass
7.2
In NOTE 2, add “or JIS standard (identical to or
modified IEC)” after the word, IEC standard.
modified IEC)” after the word, IEC standard.
N/A
8.5
In the first paragraph, add “and Class 0I
Equipment” after the words, Class I Equipment.
Equipment” after the words, Class I Equipment.
N/A
8.5
In the six paragraph (before NOTE 3), add the
following to the end of the first sentence.
CLASS 0I EQUIPMENT shall be provided with a
protective earthing terminal at any point outside
the apparatus where easily visible or a protective
external earth wire from mains plug.
following to the end of the first sentence.
CLASS 0I EQUIPMENT shall be provided with a
protective earthing terminal at any point outside
the apparatus where easily visible or a protective
external earth wire from mains plug.
N/A
8.11
In NOTE 2, c), add “or JIS C 2107, JIS C 2336, JIS
C 2338” after the reference, IEC 60454.
C 2338” after the reference, IEC 60454.
N/A
9.1.1.1
In the last paragraph, add the following sentence
after the first sentence.
For CLASS 0I EQUIPMENT, the r.m.s. TOUCH-
CURRENT to earth shall not be more than 1.0 mA.
after the first sentence.
For CLASS 0I EQUIPMENT, the r.m.s. TOUCH-
CURRENT to earth shall not be more than 1.0 mA.
N/A
10
In NOTE, replace “IEC 60664-1 and IEC 60664-4
[9]” by “JIS C 0664:2003 and IEC/TR3 60664-4 [8]”
[9]” by “JIS C 0664:2003 and IEC/TR3 60664-4 [8]”
Pass
10.1
Add “CLASS 0I EQUIPMENT and” to the head of
the first paragraph.
the first paragraph.
N/A
Click on the first or last page to see other SB 200 (serv.man3) service manuals if exist.